Ask Experts Questions for FREE Help !
Ask
    igottogonow's Avatar
    igottogonow Posts: 128, Reputation: 2
    Junior Member
     
    #1

    Jul 9, 2008, 02:42 PM
    Coxfire Place insert
    Hi,
    I was wondering if anyone knew where I can get a gasket that goes between the damper position and the firebox, it controls the air flow to the firebox. Or what material to use to make one?

Check out some similar questions!

Cannot insert tampon [ 4 Answers ]

I have a question about tampons. I am 14 years old and a freshman in high school and I have had my period for about 2 years. I have a very heavy flow and I have never been able to insert a tampon and it is extremely frustrating. I have gone through many different brands and nothing ever works. I...

Chimney Insert [ 2 Answers ]

I had to replace my Hot Water Heater and chose a unit that was a bit larger than the old unit. Because there was a difference in height between the old and new, I had to "punch" a new hole into my chimney for the exhaust. The old set-up had my furnace exhaust and water heater exhaust connected to a...

Excel insert row [ 2 Answers ]

Studying ECDL using ABCOL Blackboard. Unable to insert blank row. i.e. without it being numbered. To form two lines of heading a column John Clark

Please insert disk into drive A [ 4 Answers ]

I took my computer apart and put it back together since I installed a cd burner. However I'm having issues with my floppy. At first the light was staying on because I had the cable reversed. I changed the cable and made sure pin1 was aligned with the red stripe. Win2k sees the floppy drive but...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.