Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet Flapper !
[ 11 Answers ]
Okay... my father decided to fix the toilets one day for a variety of reasons I won't go into right now... BUT ever since THEY HAVEN'T BEEN RIGHT!! Wish he'd leave my HOUSE ALONE!! Anyway, I digress... The FLAPPER on the 2 toilets aren't working properly. When you flush they stay up for just about...
Toilet Flapper
[ 12 Answers ]
The toilet flapper closer too soon (as soon as you release the lever). It is a new flapper; any suggestions?
Flapper refuses to go down in toilet
[ 4 Answers ]
I recently installed my flapper in my toilet and it was working over the last couple of days. When I went to use it this morning, I noticed the flapper was not going down. In other words, it was not returning to the seat. It remained up. I loosened the chain and tightend the chain. Can...
Toilet Flapper Won't Drop
[ 2 Answers ]
When flushed, my toilet flapper immediately raises to a 45 degree angle, but then it will not drop completely unless the handle outside the tank is pulled up (jiggling does not solve it). It drops partially, but then the chain is tight and it is does not drop further. Once you pull up the handle,...
Flapper will not close properly
[ 5 Answers ]
:confused: Hi, it appears that there is a lot of good plumbing advice here. Here's my problem. I have had problems with the flush valve on my 3.5 gallon one-piece Crane toilet for about the past month. I have replaced the old flapper, a white plastic frame with a cup on one end and a flapper on... View more questions Search
|