Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Emerson motor condenser wiring replacing 3 wire motor with 5 wire.
[ 5 Answers ]
Any recommendations? New motor apparently is capable of running in either direction by switching brown and purple wires going to the capacitor. Looks like then either the remaining brown or purple is spliced to or hooked up to the same terminal as the yellow. Thanks.
Trane condenser fan motor to A.O.Smith condenser fan motor
[ 2 Answers ]
The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...
Replacing a 1990 Emerson Fan Motor
[ 3 Answers ]
I am replacing a 1990 Emerson Fan Motor (1/3 hp,1075 rpm, ccw) for a home air conditioning unit with a 2007 Dayton replacement motor (4M206G) and need help with the wiring. Original Emerson has Yellow, brown, and black wires. New Dayton has brown, brown/white stripe, black, and purple wires, and a...
Condenser Fan Motor
[ 1 Answers ]
I meant to say where on the contactor does the black and white wires go I already put the browns on the capacitor thanks for all your support
Wiring emerson fan motor for outside unit
[ 1 Answers ]
I need to how to wire a emerson motor. The old motor and a clip that you plugged in. The emerson has no clip or plug it looks like you have to hard wire it. View more questions Search
|