Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to network printers?
[ 2 Answers ]
Ok, here is my setup... I have 2 desktop PC's, one I use as a "server" the other is for personal use. I also of 3 wireless laptops that are for personal use. I currently have 3 printers and they are hooked up to the "server". I would like to know if I can and how I can use all three printers on all...
Multiple printers
[ 15 Answers ]
I am trying to hook multiple printers up on one system. If they are both usb then I can hook them up and then share them and it won't be a problem when another system uses either printer. Is this correct. Also if I have to use a switch is there one that will do the switching automatically or will...
Canon All-In-One printers
[ 1 Answers ]
I have recently had a problem with a Canon MP700. Everything worked beautifuly except the scanning function. I reinstalled the drivers exactly how the instructions asked, reinstalled the scanner and usb composite device separately, reinstalled the software, tested the printer on a different...
Printers
[ 1 Answers ]
:(Hello Everyone) Anyone I am having a real rough time trying to figure this one out, Loaded a firmware on my printer, and now it's sending characters we do not understand, we talked to a tech, and he explained to us that the firmware that was loaded had brain washed the printer into believe that...
Ink jet printers
[ 1 Answers ]
?? I've had 3 computers and have had 3 printers and HAVE USED WIND. 98, 98se AND NOW Xp . My printers were Lexmark Z22, cannon i320 and Hp 3322. In each case they all print approx. 33% smaller then what shows on the monitor! Is this simply a fact that all printers print 33% smaller or is it... View more questions Search
|