Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pressure tank seems empty of water after installing new one
[ 5 Answers ]
After installing a new pressure tank, pressure switch, plumbing and setting tank pressure and cut-in and cut out, the tank seems to be very light, (no or little water in tank). Shouldn't the tank be heavy from being half full with water (draw-down amount)? Thanks! Cliff
Well pump pressure
[ 1 Answers ]
Hello My name is Al and I live in Ga. We just bought a home about 20 years old. The water is supplied via a well. The pump is located out side in a small pump house. The tank and switches seem to be rather new. I am told the well is some 3-500 ft deep, not sure of actual depth. The tank is a...
Washing machine vibrates badly, even when running empty!
[ 1 Answers ]
My Fridgidair washing machine has vibrated badly it seems like since we bought it about 3 years ago. It's not an unbalanced load, because I've tested it without any cloths in it, shouldn't it run nice a smooth without anything in it? I tried levelling it several times and it hasn't worked. ...
Small tank in loft empty
[ 2 Answers ]
Hi, A radiator began leaking a few weeks ago so I switched it off and left it because I was going away. When I went away I switched the Central Heating off and now I'm back, it won't work, the central heating I mean. Won't fire up. To tell the truth last night it did work - but something is...
Small tank in loft empty
[ 3 Answers ]
Is your system a two pipe or one pipe system? A two pipe system has a hot supply which feeds the radiator, and the cold goes back to the boiler. A single pipe system feeds through each radiator in a series. Turning off one radiator in such a system will defeat the whole zone. If it is a... View more questions Search
|