Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
DSC PC 1832 programming troubles
[ 9 Answers ]
Hi…I am currently replacing an old DSC PC 2525 home security system with a newer PC 1832. The trouble is… I am having difficulty even getting to first base programming this unit Is there someone on board who can walk me through this? This is what I have: 2 new keypads.. a pk 5501 at the...
Dsc alarm 1832 connection to control 4 home automation4
[ 2 Answers ]
What do I need to connect a DSC 1832 control panel to Control home automation system?
Is there a way to reset master code on dsc 1832
[ 2 Answers ]
I have a DSC 1832 security system at my home but never got the master code from the installer who I have now lost touch with. I need to set the clock on my 5501 keypad and it appears that requires the master code. I have the installer code which is still the default code and I have my user code...
Trouble with DSC 1832 programming
[ 3 Answers ]
Recently I have installed dsc 1832 security system . So far I have done good. But I can not solve my smoke detector problem . Smoke detector is FSA-410BT 4-wire . I have run cat5 wire for this connection . The reason is simply - I had left over cat5 . I have used Bro for 12v+ and BLU for GND....
Dsc 1832 resistor value
[ 1 Answers ]
I have a DCS 1832 and I am getting intermitting open. The wires at the control panel are tightly secured. It could be a resistor problem and I am unsure of to what the resitor value should be for the zones. Can you help? View more questions Search
|