|
|
|
|
current pert
|
|
Jul 21, 2012, 03:47 AM
|
|
Install undermount sink on top of counter?
Free countertop, very good price on undermount sink...
What if I just caulked the sink to death so I can put it on top of a laminate counter? I don't have a plunge router and don't want to do Counter-Seal (edge kit for undermount sinks on laminate). What are the odds it will leak anyway?
|
|
|
Uber Member
|
|
Jul 21, 2012, 05:35 AM
|
|
With enough silicone caulk it should work but not look too good with the mounting lip that high. BTW you don't need a plunge routed to do this, make a template and don't drink too much coffee!
|
|
|
current pert
|
|
Jul 21, 2012, 08:24 AM
|
|
Oops I didn't know the lip would be high. I've never seen one in person. Oh well, I'll find out soon enough.
The video for the kit to edge a laminate top calls for a plunge router I guess to make sure it's a super clean smooth cut? Mine wouldn't be that's for sure.
|
|
|
Uber Member
|
|
Jul 21, 2012, 01:01 PM
|
|
Didn't see that was your post. Thickness depends on the sink. SS is thin but ceramic or cast iron is pretty thick. Plunge routed is easier but a regular type can be used. Some people use a Dremel to do the outline and then a regular one to finish. I use a regular router for hinges and it works well.
|
|
|
Ultra Member
|
|
Jul 21, 2012, 09:20 PM
|
|
If u don't have a router, u can use a saber saw. Drill a hole large enough for saw blade and cut away.
Chuck
|
|
|
current pert
|
|
Jul 22, 2012, 12:37 AM
|
|
You have both put an undermount sink on top of a counter, and/or put one under a laminate counter?
|
|
|
Uber Member
|
|
Jul 22, 2012, 08:52 AM
|
|
I wouldn't put an undermount sink in a laminate counter, the sides of the opening are unprotected. Some newer sinks can be mounted either way. CHUCK -ii was referring yo routing out a lip to let the sink sit level, not for cutting the hole. JP -what type of sink is it?
|
|
|
current pert
|
|
Jul 22, 2012, 11:44 AM
|
|
There are kits for sale to line the open edge. They are what require a plunge router.
It's stainless 16 gauge (being shipped). I'm hoping it will be thick enough to lie flat. Even 18 gauge doesn't always lie flat even with clips.
|
|
|
Uber Member
|
|
Jul 22, 2012, 05:34 PM
|
|
If you are buying a sink why didn't you get a drop in, they are pretty cheap?
|
|
|
current pert
|
|
Jul 23, 2012, 02:44 AM
|
|
All the drop ins had 3 or 4 holes, the drain in the middle (I want it near the back), and I like the D shape and depth of the one I found for a good price. Plus the heavy gauge. And I'd have it for if I ever get a solid surface counter. (But granite is not for me - all that weight and expense.)
|
|
|
Uber Member
|
|
Jul 23, 2012, 01:57 PM
|
|
JP-I would cut the hole to fit 1/8" larger than the sink. Put a good bead of silicone and set the sink down into it with a brick or 2 in the sink. 16 guage is roughly 1/16" thick and should not have a big lip. Send us a pic when done. Brian
|
|
|
current pert
|
|
Jul 28, 2012, 12:32 AM
|
|
Sink does not sit quite as flat as I had hoped and even came with a slight ripple on one spot which wasn't easy to flatten but I think it will be OK, and I managed to spend $0 on the counter, $168 on the sink, and $49 on the faucet.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Replacing an undermount sink... is it possible?
[ 2 Answers ]
Hello, My granite guy did a poor job installing the under mount sink and he used a stainless steel sink he said he can got me a "good deal" on." The sink is cheap and was installed very poorly. I am not on good terms with the granite guy because he decided to increase his price after he installed...
Undermount Sink Replacement
[ 12 Answers ]
I want to replace my undermount sink that is mounted under a granite countertop. How difficult is it to remove the existing sink? I believe it is held in place by a very strong epoxy. How would the sink be removed and would it require taking up the granite countertop?
View more questions
Search
|