Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Concerns with circuit overload because of bathroom remodeling
[ 1 Answers ]
I’m in the process of remodeling my basement bathroom and have hit a road-block with the wiring. Here are my questions. • Before I started my basement bathroom remodel, the only thing that was wired in the bathroom was a vanity light from a 15A circuit. This circuit is shared with the upstairs...
Bathroom circuit
[ 1 Answers ]
I am putting a new bathroom in basement and want to know the correct wiring. I will be running a 20 amp circuit with a GFI outlet, vanity lighting, and a small exhaust fan. I want to run the fan and lights on their own switches. Can the GFI and others run off same circuit? If so how do I wire...
Wiring a switch and GFCI circuit
[ 3 Answers ]
I am in the process of wiring my bathroom. The lighting and fan circuit has one fan, one overhead light and one vanity light. I was wanting to use a NuTone single space / 3 switch unit for all three. Wiring that is all very straight forward but the fan requires a GFCI circuit to make it OK for over...
Bathroom Circuit around corner?
[ 2 Answers ]
I am in the middle of a complete remodeling and upgrade of my 80 YO,5' x 9' bathroom. Toilet runs ditect into the 4" vent stack and will remain in the same place. New sink is circuit vented back to the stack and will be moved approx 15" further away from the stack but extending the 2" circuit vent...
Bathroom Vent
[ 5 Answers ]
We just remodeled a 1st floor bathroom. There is 1 sink, a shower and a toilet. They all drain into a 4" main with the shower at the far end then the sink then the shower. Before remodeling there were 2, 2" vents tapped off the horizontal main, 1 between the toilet and the sink drain entry and one... View more questions Search
|