Not your question?
Ask your question
View similar questions
Check out some similar questions!
Need an air gap for sump pump discharge
[ 20 Answers ]
My sump pump drainage system was not set up correctly. The 1 1/2 inch PVC pipe runs outside the house, into the ground, and is connected to the storm sewer. I understand it is supposed to drain into a larger pipe (3 or 4 inches) which would allow an air space and more room. Since there is no...
Drain Flies from pipe in Sump Pump Area
[ 4 Answers ]
We've been in our home for two years now. For the first year, we were fine, but this year, we've had record rainfall and billions of drain flies since late February. We didn't know where they were coming from at first, but now we know where... the pipe where the sump pump is located. See attached...
Length of Sump Pump exhause hose/pipe
[ 2 Answers ]
Sump Pump hose length - how long of a hose/pipe can I safely connect to my sump pump without risk of damage or wearing it out? My current setup is that the pump, pumps up a PVC pipe (9') then out to the exterior which is 15', from the exterior I have about 30' of PVS which is sloped, then about...
Washer discharge into sump pump
[ 2 Answers ]
Hello, I just moved into a new old house and I am experiencing problems with my washing machine that are related to an expected plumbing issue. The issue is that my washing machine is causing my clothes to smell very damp and musty despite the fact that they were washed and dried. I believe that...
Tieing in a backup sump pump to existing copper discharge pipe
[ 3 Answers ]
Does anyone know if I can tie in a backup sump pump into an existing copper discharge pipe of 1.5 inches. The back up pump comes with a "y" connector made of PVC. How do I connect the PVC connector into the copper discharge pipe? Thanks. View more questions Search
|