Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Symmons Temptrol shower gets cold after 3-4 minutes
[ 5 Answers ]
Hi, Great site... I have a Symmons Temptrol shower faucet in 2 bathrooms. One of them works great, we have a hot water tankless furnace and you can take a shower forever in that one without the water cooling off. All of the faucets/appliances and the other shower keep hot water for as long as...
Symmons temptrol diverter repair?
[ 5 Answers ]
Is is possible to adjust the new diverter once it has been installed? The shower will only come on when the diverter is moved to the middle.
Symmons - Temptrol Diverter
[ 22 Answers ]
I have the above diverter in my bathroom. Recently it started to leak from the diverter handle that changes the use from tub to shower. I purchased the Symmons TA-25A Iverter Spindle to replace old. My problem is that I do not know how to remove the old spindle. Can anyone help me with my problem?
SYMMONS Temptrol leaking from diverter
[ 1 Answers ]
Symmons sent the replacement seats and tools to repair a leak from the diverter hole that happens only when water is turned on. I replaced the seats, tightening by hand stopping short of cranking them. (I didn't use a torque wrench). Three times I removed them and adjusted them, but the...
Symmons temptrol valve on shower/tub
[ 5 Answers ]
I can only get hot water from this brand new valve. Yhe only way to get cooler water is to reduce the valve to a point where I get very low flow. Increasing the flow to a satisfactory flow only gives hot water. The water coming in is at 130 degrees F. I can not change the temp of the water coming... View more questions Search
|