Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Concerns with circuit overload because of bathroom remodeling
[ 1 Answers ]
I’m in the process of remodeling my basement bathroom and have hit a road-block with the wiring. Here are my questions. • Before I started my basement bathroom remodel, the only thing that was wired in the bathroom was a vanity light from a 15A circuit. This circuit is shared with the upstairs...
Bathroom circuit
[ 1 Answers ]
I am putting a new bathroom in basement and want to know the correct wiring. I will be running a 20 amp circuit with a GFI outlet, vanity lighting, and a small exhaust fan. I want to run the fan and lights on their own switches. Can the GFI and others run off same circuit? If so how do I wire...
Drywall corner technique
[ 6 Answers ]
Well, I am progressing with my seemingly endless bathroom remodel and have a few drywll/mudding questions: 1) What are some techniques for neatly mudding and sanding the top ceiling corners where the 2 walls and ceiling meet? I have a corner sponge which is great for the long 2 wall corners but...
Outside GFI circuit - 15amp outlet on 20amp circuit
[ 1 Answers ]
I need a better understanding of what I should do when setting up my new outdoor circuit. I've got a circuit that runs about 150 feet, so I'm installing 10g wire to allow for the voltage drop. I read in the Home Depot Electrical 123 book that I can have at most a 15amp circuit with 10g wire on...
Bathroom Vent fan GFCI circuit
[ 3 Answers ]
My NuTone fan says that it's UL approved for over shower use when wired with GFCI circuit. Would it be acceptable if I ran the fan power wire first through a plain face (non-outlet, but outlet sized unit) GFCI unit, through the switch and to the fan with nothing else on that circuit? I know that I... View more questions Search
|