Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to add a "c" wire to a old 2 wire (only no common) furnace
[ 0 Answers ]
Hi I have a honeywell R8184g1286 burner/controller and it only has 2 T terminals that go to the thermostat, the other 2 connecters are for the flame sensor, I am trying to hook up a wifi honeywell thermostat. Can I just add a wire to one of the terminals for the common?...
220 third wire common or ground -- with 3 wire system?
[ 1 Answers ]
Help - I want to be sure to get this correct. I am replacing my 100 Amp sub-panel in our In-Law quarters. The sub-panel is being feed by a 4 wire system and common and ground in Sub-panel box are not connected. Does the 3rd wire for 3 wire stove, hot water heater, etc go to the ground lug or the...
How can I add a common "C" wire?
[ 2 Answers ]
I have a Miller furnace CMF80-PO and I would like to add a common 'C' wire for my new 3M-50 thermostat. Only 4 screws, T1(RH) T2(W) and the other two are F1 and F2. It don't have the regular code letters, it got 2 wires connected to those (yellow wires). I wondering if 1 of those wires could be use...
Common wire in furnace
[ 1 Answers ]
I had a furnace "expert" come in because I kept blowing a fuse in the furnace. He by passed a common wire. The furnace is an American Standard and it is brand new. It is an electric furnace. I only run it about 3 to 4 hours per day. I received my first power bill it was extremely high. I was...
Add a common wire to a new thermostat
[ 2 Answers ]
I have decided to purchase a Robertshaw thermostat model 9701i2 that requires a common wire for continuous backlighting and my Trane Air Handler model 2tee3f37b1000a does not have a "C" common on the terminal wiring block. My existing thermostat is a straight forward RC, W, Y, and G 4-wire setup. I... View more questions Search
|