Check out some similar questions!
Blower & gas exhaust blower runs at all times.
[ 0 Answers ]
I have a Thermal Zone 5 ton gas package unit Model R4GA-048K120C, When the unit is turned off the blower & gas exhaust blower runs at all times. In the heat mode on the blower will kick off when the heat chamber heats up & will come on in a min. or 2 like normal, but when the heat kicks off both...
New t-stat, blower control and blower motor
[ 1 Answers ]
I recently had a roommate try and replace our old mercury heat pump t-stat with a new programmable wifi digital. When he tested it the fan wouldn't work. A help line said to connect g, c and y to test it. This burned out our board. We replaced the board and still nothing. He went out and got a new...
Blower not working when heat (thermostat) is set, but blower comes on when on Auto.
[ 2 Answers ]
When I set the thermostat for the heat the blower does not come on. When I turn the fan on Auto the blower comes on. What's my problem?
I have a trane eletric ignition heater and blower furnace is heating up but no blower
[ 1 Answers ]
My thermostat is a white /rodgers module this clicks to start but no air blowing from the furnace in the attic which is a trane model and the same with cold air the thermostat clicks the ducane model outside whirs but no cols air.
45692-001 blower control board will not turn blower on in either heat or cooling mode
[ 2 Answers ]
Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had... View more questions Search
Add your answer here.
|