Ask Experts Questions for FREE Help !
Ask
    markhavel's Avatar
    markhavel Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 18, 2011, 10:56 AM
    I have a Carrier Weathermaker 8000. Furnace cycles but no flame.
    I have a carrier weathermaker 8000.Furnace cycles but will not flame.I replaced glow coil and cleaned flame senser.The pressure switch is in open position.Any ideas?
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Sep 18, 2011, 02:44 PM
    If pressure switch doesn't pull closed when draft inducer is running, then you have a plugged vent, plugged hose or port where pressure switch hose hooks to, bad pressure switch, faulty draft inducer, or possibly a plugged drain system if the unit is a 90+ unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Flame sensor on Weathermaker 8000? [ 3 Answers ]

I am having trouble with my weathermakerm 8000 gas furnace. I have read of other people having the same problem of the furnace turning on and off and have discovered that I may need to simply clean the flame sensor by sanding it. Can anyone tell me where I can find this on my furnace?

Need troubleshooting guide to carrier weathermaker 8000 gas furnace [ 0 Answers ]

How do I install the inducer motor assembly in weathermaker 8000 model 58wav gas furnace

Carrier weathermaker 8000 [ 7 Answers ]

Says aux heat is on but blower doesn't come on.Why?

Carrier weathermaker 8000 furnace [ 2 Answers ]

Hello everyone, I am trying to locate the reset switch on my Carrier Weathermaker 8000 furnace.Can anyone help me out? Thor T

View more questions Search