Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
3 amp 25 volt light switches
[ 5 Answers ]
I Am Upgrading A House That Was Built In 1963 And The Light Switches Have Never Been Changed,the House Was A Ge Home And All The Light Switches Are Low Voltage.does Anyone Know Where I Can Find Replacement Swithches?they Are 3 Amp 25 Volt Switches.
Wiring Leviton 3 way motion sensor switches
[ 17 Answers ]
Have done a search and found another post with the same question, but no info on the reslution of the problem. I put in a stairwell to the basement with a landing and 90 deg turn. I have installed a light fixture above the landing to light the stair well and want to control it with motion...
Light switches
[ 1 Answers ]
Here is a strange one. I am visiting my father, and he recently replaced an outlet in one bedroom and now the light switch no longer works. He didn't touch the switch at all. Here is the really odd part... now the same problem is in the adjoining bedroom. However, they are on different...
Question about back stab connections for light switches
[ 1 Answers ]
We are in a newly built home and after being there about 2 years we have noticed that some of the light switches have been popping. They are actually 3 switches that control the same light fixture. All 3 are in different boxes. I noticed these switches were installed using the back stabbed method....
Ceiling Fan single switch/Light two 3-way switches
[ 1 Answers ]
How do I wire... Ceiling Fan with Light switched separately. Light to be controlled by two 3-way switches and fan controlled by a separate single switch. :confused: View more questions Search
|