Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My dryer start with heat and after 10 minutes there is no heat / let dryer sit 10 min
[ 1 Answers ]
I have a kenmore gas dryer when I start there is heat then after 10 minutes there is no heat so I let it sit 10 minutes and there is heat again and so on/// I have changed the cycling thermostat worked for 1 day only
Kenmore dryer won't heat.changed the heat element+thermal fuse.still won't heat
[ 1 Answers ]
Kenmore dryer(110.96582100) is 15 years old. Worked great until it stopped heating. Actually it started taking longer and longer to dry the clothes. But now it won't heat at all. I've changed the heating element and thermal fuse. Could it be the thermistor or high limit thermostat? Don't want...
Kenmore Model 417.94712400 stackable washer/dryer; dryer doesn't heat up.
[ 4 Answers ]
Dryer drum rotates, and it responds to the "cycles" dial, but the heating element doesn't heat up. Is there a reset button somewhere, or do I need to replace the heating element, OR? Thank you.
I have a frigidaire dryer model number FEQ1442ESO. The dryer runs but doesn't heat.
[ 0 Answers ]
I'm guessing the thermal limiter is bad, but can't figure out how to get to it.
Dining room circuit only works while dryer is running, Dryer doesn't heat up?
[ 7 Answers ]
Old house with knob and tube wiring. Dryer has 3wire w/ground. 60 Amp Fuse Box. With the lack of circuits there is a lot of fuses blown. Friend/owner has upped the fuses all to 30 amps and has been warned of the dangers associated. Dining works normally some of te time, but at different periods it... View more questions Search
|