Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue.
[ 11 Answers ]
I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -
Trane Heat Pump tstat replacement with Honeywell prog - wiring question
[ 1 Answers ]
I want to replace my Trane Weathertron tstat with a Honeywell RTH7400 prog one. I have a Trane heat pump with aux heat. I've been poring over these thread piece-mealing some info the follow is the result. The old wiring scheme: X2 - black O - orange G - green Y - yellow T - tan/brown R -...
Honeywell RTH 7000 Thermostat Installation
[ 1 Answers ]
I have an old Honeywell thermostat (model T874C1000) and want to install a new Honeywell RTH7000. The old one had 2 mercury switches for the heat and one merc switch for the a/c. As the outside compressor indicates Heat Pump, I'm assuming I have a 2-stage heat pump system. The wiring...
Honeywell thermostat heat/cool in Rheem 2 stage furnace?
[ 1 Answers ]
I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the...
Honeywell rth 230B thermostat
[ 1 Answers ]
Need part no. and location of dealer for replacement filters, as my filter light is on. Also need instructions on replacing. View more questions Search
|