Search:
Type: Posts; User: JKF
Search:
Search took 0.00 seconds.
-
To Clarify: Site A -> Core 2 miles SM Fiber OR Wireless. Site B-> Core MM Fiber about 10 Feet ( same Room).
-
I will try switching the fiber pairs but I do not think that is the problem because of the same issue when we switch to the wireless link instead of using the fiber.
-
No change in speed. Site A to B replys were <1ms. Site B to A <10ms. No changes when Subnet mask was changed or packet size was increased. Neither way would reply to 6400 size. Fiber test good per...
-
No backup connection to ISP. It is backup to our core switch. Normally Wireless connection is left powered down and olny used (powered up) if the fiber connection goes down. So we did not set up...
-
Attached .pdf. Did not look like the zip file went.
-
I have attached a .zip file that should have a jpg image of what I am trying to explain.
-
Having trouble getting it sized correctly to post.
-
Single mode from Site A to core (about 2 miles or so). Multimode from Core to Site B (located in same Room).
-
Core is a HP 9300. Site A and B are HP 2848.
-
Fiber is new. Single mode. Working on a diagram but I am having some trouble. I will post when I get it done.
-
Let me try to explain by using your picture. Site A PC1(10.31.8.69) Switch 10.31.8.11
From there fiber to Core Switch/Router Which has Route tables
And IP 10.31.8.1, 10.31.7.1 etc.
Site B has...
-
Passes through the switch. Switched network not routed network.
-
I will have to get out to that location so it will take some time. But every tracert I ran went like this. 2 hops. First 10.31.1.1 ( our core router) Second was the server. Responses were 5-8 ms.
-
Running applications from the server. One in particular opens in 10 sec at every other location but at that site it takes 3 min. Browsing and opening files on multiple servers is not as fast as at...
-
Pings & tracert are good and with quick responses from both the switch and PC.
-
They are on the Same network, IP of Client is 10.31.8.5 Mask 255.255.255.0 Gate 10.31.8.1. Server is 10.31.4.5 Mask 255.255.255.0 THe only router is our core router at the servers location. Took...
-
Ok. I have 2 PC's that at one location called site A are running very slow but when I bring them to site b they speed up considerably. Site A and B are connected via Gig Fiber. I also changed the...
|