Search:

By using 2X4s and either make wooden stakes or buying some metal stakes.

Would like more information on what brand you have and also how did you check the fuses, outlet & plug. Did you use a volt meter?

From what I have read on this site about the same problems that you are having, it appears that you may have a clogged line on the cold water line and it could be at or near the faucet. Close your...

By by-passing the switch I am assuming he tied the two wire together from the motor and if this is just off /on then it should work. However if this is forward / reverse and by tying the two wires...

I would check the shower hose or head for a screen and see if it is clear. If not clean or replace the screen(s).

What was the switch used for? Was it an off / on or forward / reverse switch?

I know but after going through a couple of months short cycling it just sounds weird. Now the next project is converting it from 115vac to 230vac and this should help reduce the amount of amps and...

Thanks, I am not sure how far down. I just bought this place last year and there wasn't any info on how deep the well is. My neighbor said it is a shallow well . Also, it takes about ten minutes for...

Can you work on it from behind the wall? You can make an access panel for future repairs.

Just installed a new pressure tank for my house. I had a diaphragm leak in old yank and you guys helped me with solving that problem. I went from a 33gal tank to an 85 gal tank. Now, it seams like...

I thank you for these tips and had a quick squirt of cold water in my face this morning checking the air valve tip out. (haha) Well now I can replace the tank with a little bigger one. Again thanks.

Did you just take the fish from the pond and put them right into the new aquarium?

I have a diaphragm well tank that keeps kicking on and off pretty fast when using the water in the house. I have check the pressure when pump is off and the pressure is 38psi and the gauge reads...