Search:
Type: Posts; User: fcharger
Search:
Search took 0.00 seconds.
-
I have a 20" Panasonic flat panel TV model CT-20SL14J.
The remote only works if you press an exact channel number. If you press the channel button it always goes to channel 2, no matter what...
-
Yes you can. Go to the new company and ask for their forms. Fill it in and they do the rest. Depending what investment are inside some or all might have to be liquidated because the new company...
-
Changed the 2 pole breaker and have hot water. Thank you for your excellent help.
-
Checked the power in the disconnect swith. White to ground shows almost no voltage. Black to ground 125 volts. Went to breaker box. At double breaker, black to ground 125 volts as expected, white...
-
I did what you suggested. When I first wired the heater I had checked the power at the heater point and it was 220 volts. Now there is 125V sometimes and sometimes even less so perhaps the breaker...
-
Can try. Have a volt/ohm meter. What should I do?
-
The heater is 220 volts because that was what was there before. The water was never hot nor warm. The red button is not out. The breaker has not been tripped. Water flows well from all other hot...
-
The sink faucet is really two faucets, the left being the hot and the right being the cold. Cold water runs well but not the hot side. You say I did nothing wrong. How come there is no hot water. ...
-
The old water heater died. Bot one (38 gals) at HD. Installed exactly like the old one was as follows--3 CPVC pipes come out of wall. Two are joined. Before they are joined one has a valve. After...
|