Search:

Sorry for the delay in posting a response. It seemed to me that any solution that required the generator to be disassembled and rewired (not such a good idea), or the fabrication of a "strap" that...

If you mean a removable strap between ground and neutral at the generator distribution panel, I think that won't help for the following reasons. First, neutral and ground are already bonded at the...

Unfortunately, no. The L6-20 delivers only 240V between X and Y. There's no provision for delivering 120V between X or Y and neutral. There is no neutral in an L6-20. Running neutral through the...

I have an old 5KW generator with an L6-20 and a 5-20R duplex receptacle. From the generator itself there are two black and two white wires going to the distribution panel. Nominal voltage is 120...

Re: blades

Oops, forgot to mention, if you're going to remove the deck, there are also two struts in the front that have to be unpinned as well, but it will probably be obvious.

Re: blades

They actually come off quite easily. Raise the deck as high as it will go. Take a 9/16 socket & wrench, reach under with both hands, and find the bolt in the center of the blade. ...

Here's the proposal that's on the table. The company lends me $100K, which I use to immediately purchase the stock. The company pays my back salary in installments over three years, withholding...

My employer, a small startup, is $100K behind in paying my salary. The company has offered me 200K shares of company stock in lieu of back salary, which I've agreed in principle to accept. From a...

EWeek magazine has a recent article entitled "10 Programming Languages You Should Learn Right Now". Java is number 8 on the list, but has more job openings (as listed on dice.com) than all the...

My winter project is to build a 12x20 shed in the far corner of the back yard. I'd like to run electric service for lights and power tools. On the outside of the house about 30' from the main panel...