Search:

When the yellow jacket brand gauges are put on a 3 ton Tempstar heat pump what should the correct suction pressure and head pressure be. I suspect it to be overcharged in freon. Because it is...

Sounds like the belt tension idler, very common problem easy to do it yourself.

Replace the belt tension idler, works every time, just had to replace my own, now squeek is gone

How old is it? Educated guess is the tension idler is bad, just replaced one on mine, sqeeking is gone.

Try replacing the relay for the fan

The Honeywell is color coded and simple to use. Is there a switch on/in the stat for gas/electric ? If so move it to electric. Begin at right side with red with jumper (red rc and red) red goes to R...

No such thing legally. If you trully want to be certified and do it free, apply you your State training departments Hazmat seminars to get certified. Don't try the bogus route you will go to jail...

Sounds like you have a bad valve at the water inlet. Are you sure you turned the water to it back on ? If it is dripping into tray causing a block of ice in your pan, then the tube supply for water...

Have you ever leveled it up, from side to side and front and back?

Replace it.

How old is it, have you tried moving the control manully to rinse or spin. Will it work that way, if it does the control is most likely bad and should be replaced

Check the receptacle to see if you are getting 120 volts. If it has a plug in on it make sure it is plugged in all the way. How old is it?

I would check the power source first, if it has a plug in or hardwired, plug could be partially unplugged, then check with a meter the voltage to see if you are getting 120 volts. If that all checks...

My compressor, accumulator tank and all lines freeze off when the temp goes below 40 what could be causing this? The condenser never freezes and it is not low on freon can you help me

I did install a compressor blanket just yesterday with a heater as well, it did cut the noise in half maybe, but I like your idea of insulating the sheet metal which the installer did not do, and am...

I think you are right on, I discussed this very same thing with a friend of mine in church this morning.

It is a 3 ton package unit (electric) brand is TempStar.

Am getting compressor noise out of my cold air return which is very annoying when watching TV or trying to sleep. The cold air return is plenty big enough ( 14 inches ) What is the cause/cure?

How to cure too much compressor noise coming through the cold air return..

Getting too much compressor noise through cold air return, what is the fix to this.

Getting too much compressor noise through the cold air return which is annoying while watching TV, cold air return is at the minimum of 14 inches