Search:
Type: Posts; User: hobbyist4fun
Search:
Search took 0.00 seconds.
-
Sorry, top of the tank (not top of the top).
-
Unless there's a puncture in the tank itself, most connections are at the top of the top. You'll need to remove the rear seat bottom to gain access to the fuel feed and return lines, as well as,...
-
Is that 25-30 minutes for the ATF to get warm enough that it shifts good or does your engine actually take that long to warm up? Whereabouts do you live (state or province)?
-
I believe it's integral to the distributor and your resistance reading to the ECU is out of tolerance. Aftermarket replacement is a crap shoot.
-
+1 on the ICM. Also, check your engine ECU ground is secure. Be sure to leave your plugs out long enough or add a very small amount of oil to the misfiring cylinders to remedy the cylinder washing...
-
Definitely check the large o-rings on the connecting pipe. How many miles on your 92?
-
TxGM, do Honda belts have manufacture dates encoded on them? If so, could he remove the V/C and upper timing cover to locate a DOB for the belt?
-
Sorry, did the Honda dealer even attempt to get you the code and try inputting it?
-
Did the dealer if attempt to get you the code? More than likely the dealer that you purchased the car from had to replace/install a radio rather than have an open slot in the dash or a defective...
-
You description infers that you have NO electric power: No dash lights, headlights, stereo, windows, locks, etc. If that's not the case, could you provide further confirmation. If you don't have...
-
I like to stay on the move and I just couldn't live with the "less than perfect" rattle.
I have a similar PDF that lists for a 2000 Camry 5SFE. The chart and backlash specs are different from...
-
Opened up the balancer assembly and there was scoring on the bearings. Decided to pick through a pile of discarded balancers at the machine shop in hopes I'd fine a good one. No luck, but ended up...
-
I think you hit on something there. When I tried the original #29 shims, there almost seemed like two noises (similar, but distinct). I ruled it out, but when I went to the #21 shims, there was...
-
TxGM has provided very helpful links, that I didn't notice before I added my answer. What he said... a very good read!
-
What kind of car do you have? You have to have fuel, air, and spark in a orderly sequence to get it to run. You'll need to dig a little deeper to verify what components are functioning, then...
-
Doesn't appear that you immobilizer system is recognizing your key. Is it a Master key or valet key? Also, you may want to try re-initializing your immobilizer by trying it in the driver's door. ...
-
I meant for the You can get the feel of 1 to 2 thousands to be quoted, but I guess it didn't take.
-
You can get the feel of 1 to 2 thousands That reminds me of a friend that could set the mixture with his nose. He was/is very good at it. But that's a real gift to be that sensitive. I can rotate...
-
Thanks Kitch! Sorry, the ting-ting was an attempt to describe the light metal-to-metal gear noise. The more commonly used term is probably rattle (albeit, muted somewhat).
I was hoping you...
-
Rebuilt the 2.2L engine and had to use another 5S block as the original was beyond oversizing. Problem is selecting correct shims for the balancer assy. First, I was not able to borrow/find the SST...
|