Search:
Type: Posts; User: waynesworld
Search:
Search took 0.01 seconds.
-
Thanks, Tx, I was aiming it towards you, but was failing...
-
Hard to start, won't start at times.
Sometimes sluggish while driving.
Fuel pump IS working (not too long ago replaced).
Throttle position sensor or fuel log relay?
Oh yeah, I think it's 3.3 V-6...
-
Ok, Grease, help me out here on this one; I got the head/timing chain replaced, now I seem to have a throttle body issue, which is strange because it wasn't touched...
It now has a 'stumble' when...
-
Well, I guess, after 280,000 miles and 19-degree weather, my little truck needs some help.
Sounds like the usual Nissan z24 knock/rough idle after cranking it on Monday at about 19-degrees and...
-
Breezway, 12'x5', with only one opening to the outside.
Just like you described, garage (once was a garage, now part of house, although seperate) to laundry room.
The roof has been restructured so...
-
Ok, so I have this semi-enclosed porch/breezeway, about 12-ft by 5-ft , that the cement floor gets extremely damp(wet) whenever it rains or the humidity level gets to about 500 percent(feels like it...
-
Let's say someone that was staying in your household decided to start calling someone internationally on your house phone and hid your phone bill for two months and racked-up THOUSANDS of dollars in...
-
Bananas are shipped green and go through a gassing process to start the ripening stage when they arrive in the US.
Go to your local grocery store and ask them about banana "stages" and they should...
-
Me, I would go to my local hardware/appliance store and ask them if you could simply just replace the dryer cord with the one you need.
It's pretty simple, just three or four color-coded screws on...
-
Could be a couple things; there are several heating elements that one or more could be bad, but from MY past experience, check the voltage on the cord where it connects to the dryer and make sure it...
-
First, you need to see if you are getting the correct voltage coming out of the wall; the clock/lights work on 120, not 240.
A test light/voltage meter should show how much power is at the wall...
-
Probably needs a new radiator.
-
Possible fuel pump failure.
I have a '94 Yukon; had to drop the tank in Entergy parking lot and replace fuel pump... started right up!
-
If I'm not mistaken, go get a Haynes manual from Auto-Zone or other parts store and it should have the diagram listed in it.
-
Grab a few FABRIC SOFTENER sheets, yes, the ones you use in your clothes dryer.
Works GREAT on windshields!
-
My wife SWEARS this is true... BUT...
Here's a thought... the "float", or gas gauge in your tank looks, and operates much like the float in your toilet bowl.
The exception is that the toilet float...
-
I bought a rear-engine riding mower awhile back from a friend of mine that was gave to him by a distant relative.
It looks just like a Snapper rear-engine rider; only it's about 6-or-8 inches longer...
-
Don't know what year truck it is, but a friend of mine had similar problem on '98 gmc and turned out to be ground wire coming from back of taillight housing-to-frame.
-
What year is this Nissan?
I have experienced with my 2 z-24 engines that a faulty thermostat and the "base" gasket on throttle-body equipped models can cause excessive idle speed.
Hope this...
-
OK, here's one for everybody... hey grease, help me out on this one;
I have a 1989 Nissan HardBody that I bought new in '89 and drove it 'till about 6 years ago; I gave it to my dad, then he passed...
-
I did forget to mention that you should check the "pick-up coil" in the lower part of the distributor (I,m guessing that this is what txgreasemonkey refers to as the ignitor).
I did have a '77 Trans...
-
Check your vacuum-advance hose;also the pcv breather hose.
Just a qiuck thought...
-
It sounds to me like "dirty gas"... yeah, I know, that's an open invitation for a reply...
Seriously, it sounds like there's an interruption on the pressure, or trash (very FINE particles) that...
-
I work in the retail grocery business and have had to deal with this sort of problem for MANY years.
The ONLY way to control mice/rats is to eliminate the entry points into the residence/building,...
-
There's an old saying that snakes cannot stand moth balls; maybe toss a few boxes of these will help it leave.
Also, there is a product called a "snake-board", or "rat-boards" which is just like...
-
I live in the DEEP south and we have to deal with a LOT of fire ants.
The BEST thing I have found is Orothene.
It comes in a round, tall container and stinks just like a rotten egg.
There are a...
-
Crowder, how did you wire the stereo?
Did you run all the wires straight to the fuse-box, or did you splice into the factory feeds?
You need to find a wiring schematic of what all feeds through the...
-
Check your bulb bases; a friend of mine had same problem.
Just my humble...
-
Have you checked, or ever replaced the thermostat?
Also make sure the heater "door" is working; it may have a vacuum leak not letting it close from outside air-to-heat air.
Just my humble opinion...
-
Run a search on Google.
There are places to get what your looking for, for a price (shouldn't be too bad).
Just my humble opinion...
-
I would, first, try a local junkyard for the piece.
If that doesn't work, check with your local body shops.
If all fails, try to find a body shop or dealer that knows or deals with a company called...
-
Check all of your vacuum lines to insure that they are connected properly.
Also, just as txgreasemonkey suggested, make sure that all the regular "tune-up" items are in good shape.
Hope this...
-
Throttle Position Sensor.
I know of two s-10's that had same problem and, after many headaches, that's what it turned out to be.
Just a thought...
-
Cjt has soom good points.
I have a friend that has a '97-'96 (cant remember) Z-71 with sort-of the same problems.
After cleaning/checking all connectors, turns out it was where the base of the bulb...
-
Call your local Napa or Auto-Zone.
They should be able to tell you with a few key-punches.
If it's modified, such as a high-performance camshaft, it's a totally different ball-game...
Just my...
-
Hello,
I had a similar problem with my 1967 Camaro; no oil pressue at idle.
Turns out it was the "cheap" oil pressure gauge.
I know, it's not computer controlled, however, I would say it could be...
-
I've got a Batman bicycle license plate that I've kept over the years and was wondering if anybody else has ever seen one.
I'm 41 now, and have had it as long as I can remember, so it's probably at...
-
Hi, I have a '99 Dodge Dakota and have a electrical problem I can't figure out.
If I don't drive the truck for 2 days, it drains the battery.
I have checked everything I can possibly think that...
-
Thanks, tom
Yes, I have checked everything that's possible, except for pulling the tank off.
It's not leaking 'outside' the tank; could it be possible that the flapper is not seating properly,...
-
Hi, I have a water leak coming from somewhere in-or-around a toilet.
It only leaks if the water supply is on. The water comes from the bottom, towards the back, where the (rear-discharge,...
|