Search:

I own a new levered corkscrew that keeps pushing the cork into the bottle. The screw is plenty sharp and the device is correctly assembled and operates normally. Anyone had this problem?
Thanks....

Model IRD470002. Drain hose is clear. Additional suggestions?
Thx.

Model 45A. 1/4 hp. Chain drive. Plugged in but not working at the switch or by remote. Light does not come on either. Is there anything I can check or do I need a technician?

Thank you. That is very helpful information.

Thanks. I turned water back on and saw no leaks. Water is cycling into tray but doesn't freeze. Do I need a new ice maker?

I have a kenmore refrigerator whose ice maker stopped working. There was no water getting past the solenoid so I replaced it. Now I have water to the ice maker but it won't shut off. I had a...

Thank you. I will use your suggestions.

Drum turns. Ignitor replaced. No flame. Is there a heat element or coil in a gas dryer? Should I be looking for a flame near the ignitor?
Thanks for any suggestions.

Thank you FBE. I will see my neighbor again on Wed and will use your suggestions. In the meantime, while my neighbor has an appliance that won't heat up, I have a 7 yr old GE refrigerator model...

I'm trying to help a neighbor with a Kenmore gas dryer that is not heating up. They have replaced the ignitor and it seems to be working but still no heat. Any suggestions?
Thx

Thanks. I removed the strip but found only the holes for the strip screws.

Here is a picture that closely resembles what I'm working with:

Endura Outswing Threshold - Mill Style Finish : Door-Thresholds.com!, Your Door Threshold Superstore

The only difference is my...

Thanks for the picture. We are not talking about the same kind of threshold. Mine is under a entry door and is adjustable. It is covered with a vinyl or rubber except for the adjustable strip. I...

Roger that. I think we are talking about the same thing. The vinyl covers the aluminum threshold. I will try removing that and looking for screws. Thanks again.

Thanks for your response. The aluminum is covered with vinyl if that's what you mean. I'm wondering if I can cut it down the middle and remove each side that way.

I'm replacing a aluminum threshold. How do I remove the old one? There are no screws and the threshold ends run under the door frame. Do I need to remove the door casing?