Search:
Type: Posts; User: mike jones 1269
Search:
Search took 0.00 seconds.
-
Remember to clean the floor well and spend the extra money on a good adhesive
-
What could be causeing a current draw I have a 1991 crx and pulled every fuse and still can't find the source of the current draw (short) could this be because of a bad ELD
-
I have a 1991 honda crx with a code 20 could this be a bad eld (electric load detector) and if so would this show as a current draw (short) when testing negative side of batt. To terminal?
-
Yes this can be done make sure tile is clean and use a good glue like bostiks best.this is not recommended because of tile height differences and if tiles start popping loose it is a nightmare to fix...
-
Good luck with that product like they say you get what you pay for... I had a customer that called me and ask me to install his own flooring and when I got there it was sams laminate and I found that...
-
I find construction adhesive by it self works very well but make sure you scrape up the loose paint and Debris first. Sometime it takes 3 days for it to dry so it will have to be weighted to keep it...
-
If the tiles are a 9 inch tile I can almost guarantee they contain asbestos and if the glue residue on the floor looks like black like tar then asbestos is most likely there too.if the tiles are a...
-
If you are sure there is plenty of expansion on both sides (about 1/4 inch) and this is aproblem that is growing day by day it might be a moisture problem. Is it less noticeable in the morning when...
-
You can eliminate a lot of the ping sound with a good underlayment and a thicker quality laminate . The biggest compliant with laminate is the sound but a lot of customers don't know or are not told...
-
No I didn't thanks for pointing that out but if someone does a search for a related question then there is the answer. Iknow I checked older questions and answers to try to help with what I'm looking...
-
If the foam is already on the back you do not need a roll foam but if you are going over concrete slab you do need a moisture barrier
-
Solid wood needs to be nail together over wood sub floor it is to unstable as a floating floor also try to put some of the wood together in a open area check to see how warped it is then ask yourself...
-
Leaving weight on the floor won't help much but will help some, let it dry for a while see if it is something you can live with until funds are available then call manufacturer they normally have a...
-
Don't forget the installer did not make the flooring all he did was put the puzzle together sounds like cheap flooring go back to flooring manufacturer . Ask yourself did the floor look good when the...
-
Don't forget to patch the joints in the luan, stagger the joints also. Ilittle construction adhesive under luan wouldn't hurt either.
-
1991 honda crx dx models showing trouble code 20, alt. output is14.18 and a brand new batt. Which shows 12.93 volts but if I turn on the headlights the tach. Drops to 0 and the temp. gauge goes all...
-
1991 crx dx not getting fuel to the fuel fillter
|