Search:

Is it possible there is a fine crack in a fuel line that would do that? I sure can't see anything or any leakage.

I have a Poulan 2150 that will not start. It runs for about ten seconds after I prime it but after that it won't restart. Tried several times. Only runs on the primer gas when I push the bubble.
...

I have a Poulan 2150 2.1 C I Woodsman gas powered chain saw. Was running pretty good one day and about a week later I can't get it started. Plug is good, gas filter I replaced, also air filter. I...

Spin cycle sometimes stops or will not start. If you go in and move basket or kind of jiggle it the spin cycle will start once you shut the lid.

Any thoughts out there? Thanks.

Thank you very much for your offer. I will get together with my employer and see if they want to go with this. They bought the phones at an auction and they look like they are in fine shape. They...

There are two lines and probably going to be six phones. I did not install the one I had years ago. If I have good instructions I suppose I could do it.

Thank you! Very helpful. Probably a good idea to have someone install it?

Thank you for your info about the manual but what I need is the unit that goes with the phones. I had a system like this many years ago and it had like a control type box that the same phones hooked...

Bought these phones at an auction reasonable. I believe these phones need some sort of main frame to hook them up so you can hold calls, transfer etc. Any help out there on where to get this item so...

The vent pipe on the outside has a mesh on it that has been there for years. I have checked the exhaust while the blower was running and it blows out like, a hand dryer in a bathroom... with...

Well, I replaced the pressure switch and it still won't fire. I did indeed jumper it and it did fire. Now when you say blow into the tube going to the switch it should click. When I blow into the...

Thank you so much for your helpful advise. As I did jumper the two wires it did fire up and works fine. Now all I have to do is get the new switch. I don't believe there was any blockage for I could...

I replaced the exhaust blower today after the old one was running rough. It runs smooth and quiet now. Problem now is that igniter glow coil will not ignite. Switched it out with a new one because...