Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: machinedespair

Search: Search took 0.00 seconds.

  1. Check the tag on the welder make sure it is not 3...

    Check the tag on the welder make sure it is not 3 phase.
    Your house is single phase power.
  2. Answers
    2
    Views
    278

    If dryer runs but does not get hot the thermal...

    If dryer runs but does not get hot the thermal fuse is probably blown. If the thermal fuse is blown the vent is probably obstructed or tube dirty inside. You can Google thermal fuse replacement for...
  3. Answers
    4
    Views
    1,136

    Thanks. I will keep you posted.

    Thanks. I will keep you posted.
  4. The starter could be sticking because the...

    The starter could be sticking because the solenoid is bad (gm product it is mounted on the starter) or the ignition switch. Next time it sticks turn off car and see if blower motor or radio work. Is...
  5. Answers
    4
    Views
    1,136

    I was planning on triple 2x4's with placement...

    I was planning on triple 2x4's with placement above double floor joist. But the idea of no header is appealing I will have to look at my trusses. Not exactly I am properly picturing the extended...
  6. Was there oil on the spark plug? Is the gas good?...

    Was there oil on the spark plug? Is the gas good? Is the air filter good?
  7. Answers
    4
    Views
    1,136

    16 foot long header?

    Hi,
    I have a 24 ft. wide ranch with a 5/12 gable roof and basement. I am planning on removing a wall between the kitchen and living room. The wall in question is parallel with the peak. Wall is at...
  8. Answers
    4
    Views
    1,066

    Nail a 2x4 to the wall 1 1/2" above floor level...

    Nail a 2x4 to the wall 1 1/2" above floor level and use the bottom of the 2x4 for guide.
Results 1 to 8 of 8