Search:
Type: Posts; User: chappers
Search:
Search took 0.00 seconds.
-
I have taken just taken apart my shower valve to try and flush the pipes and clean it out as I am getting very low water pressure (elsewhere in the house and in the bathroom, I have no problems).
...
-
OK guys, thanks for all the tips. The broomstick didn't work - I couldn't get a pair of pliers onto the coin whatever position it was in. After turning the blades, only about 1/4 of the coin was...
-
Hey, thanks for the quick answer. I can already move the blades by turning the shaft with an allen wrench, but the coin doesn't shift. I'll try the broomstick, but is it going to make a difference?...
-
Our garbage disposer is jammed. I have explored it with my hands and had a look with a torch. There is a dime stuck between the blades and the sidewall. Only about 1/3 of the coin is protruding. Its...
-
I'm not sure if you've solved your problem, but I wanted to share my experience. I've been suffering with poor flow from my Ladylux faucet ever since I installed it 6 months ago. It was taking me 10...
-
OK, thanks for the advice. I have more information based on my experimentation over breakfast...
This morning I went and examined the hose again and it was warm/hot to the touch, despite the hot...
-
Both of the hoses have taken about 2 days to start leaking. That is an armored electrical cable behind the hose in the first picture, so your suggestion is reasonable. However, the metal sheathing is...
-
I have just installed a dishwasher in my new kitchen. My second supply hose in 3 days has just developed a leak. The first time I thought it was a faulty hose (or the dog chewed it!). Now I am not so...
-
It makes perfect sense and I will sleep better at night. Thanks!
-
I made a big error today on wiring a new circuit. I pulled 2 cables (for 2 circuits) back to the consumer panel and then connected the wrong cable. The cable that I connected was stripped at the...
|