Search:
Type: Posts; User: massplumber2008
Search:
Search took 0.13 seconds.
-
Hi B
If this is a two-piece toilet (tank and bowl), you should not be having a problem...all two-piece toilets fit an 11.5" rough in from finished wall. If this is a one-piece toilet, then 11.5"...
-
Hi guys,
Because you hear the problem after ANY toilet is flushed in the house then it sure sounds like the wax gasket has failed at the new install.
If you are the gardening type and you...
-
Yes to you John.
The grundfos crossover valve Wally posted usually works with a pump but I am familiar enough with them that they can work as he described, but as he said, it does leave cold water...
-
-
Hi John.
There really isn't an alternative here. Yes, they got away with ungrounded outlets for decades, but Yes, people also got electrocuted reaching into the sump pit when the pump failed, and...
-
Hi all
Your plumber should remove the heat trap nipples and install new dielectric nipples at a new water heater with gravity recirc. If he/she questions it, it shouldn't be too hard to find a...
-
Hi John. Happy Holidays!
I would drill holes 1.25"-1.5" holes in the walls of the sump pit (spaced out every 6 inches or so) and then surround the pit with rocks larger than the drilled holes to...
-
Yup! I agree...depends on what you want to filter out. Let us know more on why you want a point of use filter.
Thanks!~
-
Looks good John! Yeah, a little dish soap or a little silicone grease helps a lot with those fittings.
Take care!
-
The coupling below is a better job, but makes the job a bit harder to pull off is all. If you do it yourself, use the two ferncos! Good day!
-
Hi John
That looks to be a 3"x2" (or a 3"x1.5") tee fitting so a straight 3" tee is not correct. You need to get the correct tee fitting, another 3" fernco coupling, a 2" (or 1.5") fernco clamp,...
-
Deal! If you want to chat via phone at any time just private message me and I'll message back with my number! Good night!
-
Hi John
Short-term you can clean the ABS plastic pipe up and silicone the crack.
Long-term you need to remove the cracked fitting and replace with new ABS plastic pipe and fittings if you don't...
-
Hi Fred
You can try "beating" the lead back in but if you hit the hub too hard you can crack the fitting and then your problems grow exponentially!!
Instead, take a good steel wire brush and...
-
Hi Norplan
You can certainly use PEX tubing and sharkbite fittings to make a repair, however, sharkbite type fittings require a good amount of flexibility in the pipe to install (if in between...
-
I'd have to see a picture to be sure, but left hand threads are pretty rare.
If looking to shut water off to the faucet, just shut the main water supply off while working on the faucet.
-
Hi John
Like you said, its an old Kohler...a kitchen faucet with 8-10" center spread. If I remember correctly, the OL isn't important...refers to a national standard or something like that.
...
-
Hi John.
Lift of 6-8 ft. is no problem at all for the Zoeller 57. 100' horizontal run also not an issue here.
-
Hi John.
Install a sump pump pit (could be an actual pump pit with cover or even a 5 gallon bucket with 1.5" holes drilled all around the bucket)
Install only a ZOELLER M57 sump pump (click on...
-
"My only concern was if that green line served any purpose?"
I see no reason for the green line. Perhaps someone was installing a bypass line in case one of the lines developed an issue, but if...
-
Hi Mancave.
Great to hear things are going well for you, but I'd still have to bet that at least a few drops of nasty have hit the cardboard over the years...you're just getting older and must...
-
Hi Tmeyer
Sorry, but I can't tell what anything is. You colored the lines but did not explain what each color line is or what it is going to. Please define the colored lines and I should be able...
-
Hello
I can't speak to Maryland code. Call your local plumbing inspector and ask him the question. My guess is that as long as the studor vent is "readily accessible" for future swap out you can...
-
I just don't have time for that right now. I'd consult a local plumber on this and don't forget to confirm the shower drain has a ptrap under the floor.
Mark
-
-
I'm a heart attack waiting to happen...I had TWO!!
49286
-
49285
The 4" pipe is definitely the toilet drain (see image).
I believe the lavatory drain is that 2" pipe next to the 3" waste stack coming out of the floor. This drain would pick up the...
-
My treat this time Gentleman!!
49284
-
Apple fritters are more my style, but def. count me in for virtual coffee time if it ever happens!!
49281
-
Late to the party as usual!!
-
Yes, you can use a TY sweep 90
You can also use a wye fitting and use 90s or 45s off the wye, or you can use a combination wye 1/8th fitting.
How are you VENTING the shower?
Mark
-
Hi Warren
If it was a large supply line like say 1.25" or larger then I would think it is possible. However, being a guest house I'm pretty sure the supply line would be too small to video.
...
-
You follow directions well....nice job.
-
Tee goes in the other direction (flip it)...with the flow so water/condensation build up flows down the drain.
Otherwise, fine.
I like to use a 3" 90 and then install a 4"x3" stainless steel...
-
It was a lot of work, no doubt...drilling large holes is a blast, huh??
You did a nice job here...very clean.
-
Start here:
1) Lift the toilet seat and see if you can see water trickling into the bowl. If you see water trickling into the toilet then the FLAPPER needs to be replaced to resolve the issue.
...
-
Ceiling above stand alone shower leaking into shower only not below not
Ceiling above shower not below not another floor,raking when showering only
What????
Please try again.
Tell us what...
-
Try blowing compressed air back through each line...see if that dislodges anything.
Mark
-
-
Hello
There really is no way for us to estimate something like this (we would need to be at your house and count the number of bathrooms, number of floors, size of house, etc.). Travel time and...
-
Nicely done!
Looking real good, EXCEPT...
Technically, Jim caps (the black rubber caps you have on the stack) are not allowed inside a finished wall or floor.... Please message me your...
-
I would really prefer to see you use double fixture tee fittings instead of the double wye fittings, but if you can't find them then the double wyes will have to do! In that case, looks great!
...
-
Why did you point the street 45 up in the double wye on the right...that won't work? Let me know why...
-
Going down to the 1.5" DOUBLE FIXTURE TEE should be just fine...but not a double wye fitting.
Otherwise, looking great!
-
Super glad it worked...good for you. Thank you for the update!!
-
That is used in commercial plumbing and is not used in residential setting, so I would not recommend it here.
You can pipe this as I presented...just turn the double sanitary fittings sideways...
-
Hi Adkhr
That picture above better not be correct....look at the last picture I posted. It is the only way to do back to back, in fact, double back to back lavatories....*wink*.
Now, In Green...
-
Did you install a check valve in the pump line? If not, start by installing a check valve and see if that resolves recirculation issue.
Also, did you install a means to purge air out of the...
-
Hi Belz
I would not drill a hole above the ptrap...if drain backs up, and it will, water will flood the cabinet without you knowing and can cause some pretty good damage.
If you have a GRID...
-
Try this:
Corian manufacturer:
http://www.corian.com/-contact-us-form-
Or this, but VERY EXPENSIVE!! https://www.boatoutfitters.com/replacement-overflow-tube-for-corian-sinks
Try the...
|