Search:
Type: Posts; User: shawn0634
Search:
Search took 0.00 seconds.
-
I have a 92 honda civic when I start the car it idle up and down for about 5 to 10 min after that it fine then the check engine light come on after I turn it off and back on again the check engine...
-
Thank I will check that but I think it it was not sealing it would not red line that hight anyone else has any other idea
-
I have a 86 rx 7 rotarty engine before all this happen the car was fine the clutch went out so my friend change the clutch and the thermostat the car was over heating and when he start it the car...
-
Which one is the inlet and outlet house where is it connected to how do I find it
-
That what I though but that did the trick where the fuel filter locted on a 1996 saturn sl2 do you know and is it hard to change
-
I have a 1992 civic and when I turn the heater on it blow warm air it all the way in the hot position but it only blow warn air and the engine temperature gage is at regular operating temperaturn I...
-
I was coming back to tell you what I did to get it started well wild I was turning the key and the engine was cranking I was stepping on the gas at frist it did nothing but after steepping on the gas...
-
Got it started thank for your help
-
Can I jump the plug in to check for code or do I have to get the computer to check it ?
-
I have all fues are good expect for those that don't work any idea what I should do next I know I am getting fuel I am going to see if I am getting I am sure I am ?
-
I have and I found 3 fues that say trs 3/4 trs trs pl and one other one 2 of then are 10 am an one is 7.5 none of the 3 work the fues look fine but I change then anyway and they still don't work I...
-
I have a 1996 saturn sl2 it was running fine had no problem with it I let it sit for 2 day went to start it and it not starting I buy a new battry and it crank but not starting I can tell it getting...
-
I have a 1992 honda civic the heater not work I think it the blower I check all the fues and there all good but before I go taken the blower motor out any thing else I should check it not blower...
-
Got it working the harness that connect the swtch was not connected to it
-
Yeah but how do I know it not the motor could be that too anyone know of any way of testing the switch or is there a relay for the wiper motor any idea anyone
-
I have a 1992 honda civic the wiper would not work it does nothing like it deal I check all the fuse and it all good any idea ? Oh the heater don't work too but I want to fix the wiper frist ;)
-
;) I have a 1992 honda civic the wiper would not work they do nothing I try all the position on the switch nothing I check all the fuse and it all good what would be the frist step in fixing this and...
-
OK I got the honda started I am not sure what did it but I replace it with the original distributor and make sure the timing was correct I think the timing was off and I open the air intake box and...
-
Well it look like it have on a use distributor so if they replace it and put it back wrong there it would not start right ? Is the ecm ground on the thermostat housing cover in anything cause I try...
-
Someone crank it wild I check all the wire all the wire were given spark
-
It a lx with a 1.5 5 speed
-
OK I got spark and I did the k test eveything good but the car still would not start it crank and seem like it want to start this car had not been sitting for over a month and weather here is...
-
I already check all fuese they all good and I am not getting any spark I replace the whole distrobter with a use one and still no spark any other idea
-
Yeah I am pretty sure that what I hear any other way to check it what the next step
-
I hear a hhhhhh for a sec and then it stop I would think that would be it what do I do next to get this car going any idea I appreciate you taken the time in help me thank you
-
OK I have replace the ecm and the cel go out the car start still don't start it crank any idea what the problem I replace the whole distributer same problem as before would not start
-
OK I will buy one and see if that work hopefully it would I buy a use one maybe on eBay should the car atlest start up even if the only diff is the tranny
-
So it the wrong ecm it came out of a automation civic
-
OK it and lx 1.5L L4 FI 1992 honda civic 149000 miles on it
-
It and lx on the engine size I am not sure where would I find that info it not on the door and it not understand the hood and I don't see it any where on the engine it and 1.5 or a 1.6
-
Yes it stay on that why I jump it to read the code and it give me a code 19 which is a/t tranny lock up something like that and it a 5 speed could it be it and ecm for and automation tranny car that...
-
I have tested all the fuses and all are good the cel stay on when I jump it read code 19 a/t tranny lock up and it a 5 speed and like I said I test the map sensor and it give me 5.4 volt so what else...
-
OK so what the next step does this mean the ecm is good
-
I have run ture the a and be test and the map sensor is reading a 5.4 volt do I still need to do a confirming test on the ecm would I have the same result ?
-
I have a 1992 honda civic the car don't start it crank when I turn the key to the ignition not start I hear the click and the engine light stay on the code the engine light right is 19 { auto tanny...
-
This is what I am asking which wire on the map sensor is the + so I can test it does anyone know I have a green wire with yellow stripe and a white wire and a green wire which one is the + wire there...
-
OK I am trying to test the ecm here ture the map sensor which wire on the map sensor is the + can anyone tell me ? There no red wire
-
The right hand socket has 3 pin slot in it and all 3 lead to a diff wire there one wire that green with yellow stripe and a white wire and a green wire which pin slot on the socket should I put in...
-
The car is not driving all it doing is cranking so I want to check this sensor I was told to use a mult meter to check so all I want to know is which wire should I put the + and the - on the mult...
-
I don't have any red or black wire the wire that on there is yellow with green strip and white and green which one is the + and the - do you know
-
How do I test a map sensor on a 1992 honda civic the harness that connect to the map sensor have 3 wire yellow with green strip and a white and a green where do I put the + wire and the - wire of the...
-
OK testing the map sensor this is what I have when I disscount the plug from the map sensor I have 3 wire a yellow wire with green strip and a green wire and a white wire now with the mult meter how...
-
Where would I happen to find the map senser picture would be nice if you have any thank.
-
OK this is the code I get but this is the problem I have the car would not start it crack when I turn the key the check engine light turn on and this is the code I get Automatic transmission lockup...
-
Just pull the one plug out of the soft green plastic the one that has the tan and green wire then use a paper clip or wire jumper and stick it between the tan and green wire turn then turn the key on...
-
OK I found the jumper plug in now to figure out the code can someone tell me what it mean I found 2 diff website tell me diff way to read it this is what I have when I turn the key the chedck engine...
-
I would but the car don't start that the problem I have with it the check engine light on so I need to know why .
-
I am trying to find the plug in where you plug in the computer to check the check engine light it a 1992 civic can anyone tell me where it located at and if you have picture that would be great...
-
Can anyone tell me where the main relay for a 1992 honda civic is located at picture would be great if possible and can you tell me if I can test the main relay to see if it good before replace it...
-
I have a 1992 honda civic I buy to fix up at frist the car did not had a ecm I buy one and put it in it crack but would not start when I turn the key on {not start } I hear the fuel pump hmmm I guess...
|