Ask Experts Questions for FREE Help !
Ask

Search:

Type: Posts; User: DG

Search: Search took 0.02 seconds.

  1. Question: Honda Harmony 1011

    by DG
    Answers
    2
    Views
    657

    Blade 2 3/4 x 29 9/16 Belt 0.67 x 53

    Blade 2 3/4 x 29 9/16
    Belt 0.67 x 53
  2. Answers
    2
    Views
    625

    Yes , check your air for dirt and debris . This...

    Yes , check your air for dirt and debris . This is usually the cause .
  3. Answers
    3
    Views
    741

    Yes it will

    Yes it will
  4. Check Solenoid .

    Check Solenoid .
  5. Question: No Throttle Control

    by DG
    Answers
    9
    Views
    745

    That's why I go to tech schools , they all adjust...

    That's why I go to tech schools , they all adjust if you know were to look ,
  6. Question: No Throttle Control

    by DG
    Answers
    9
    Views
    745

    Okay all mowers push or rider have a way to...

    Okay all mowers push or rider have a way to throttle them up .
  7. Question: No Throttle Control

    by DG
    Answers
    9
    Views
    745

    All mowers have a throttle control , what kind do...

    All mowers have a throttle control , what kind do you have .
    I run mine at 3400 rpms .
  8. Check reverse switch.

    Check reverse switch.
  9. Question: 2006 jonh deer lt155

    by DG
    Answers
    2
    Views
    493

    48415

    48415
  10. Answers
    5
    Views
    4,567

    Your feet will tingle a lot , like they are a...

    Your feet will tingle a lot , like they are a sleep.
    You will be thirsty , and have to pee a lot .
    If it gets to high will can cause blurring vision .
  11. Answers
    1
    Views
    258

    Try a new PTO switch .

    Try a new PTO switch .
  12. Question: Engine won't turn over

    by DG
    Answers
    1
    Views
    338

    Check safety switch on blade control .

    Check safety switch on blade control .
  13. Question: Mower stop working

    by DG
    Answers
    1
    Views
    268

    Would be nice to know what type it is .

    Would be nice to know what type it is .
  14. Check brake switch , left side under dash .

    Check brake switch , left side under dash .
  15. Answers
    2
    Views
    601

    I agree with Crigby , the ones I see sticking in...

    I agree with Crigby , the ones I see sticking in valve guides is usually cause from engine running hot. Two things cause this , head fins clogged not allowing ,air flow to cool . Or running high...
  16. Question: Deere 316 no reverse

    by DG
    Answers
    3
    Views
    354

    Check the reverse check valve on top of the...

    Check the reverse check valve on top of the transmission .
  17. Answers
    1
    Views
    425

    Check fuel solenoid on bottom of carb.

    Check fuel solenoid on bottom of carb.
  18. Answers
    1
    Views
    322

    Needs new drive belts , make sure you replace...

    Needs new drive belts , make sure you replace both .
  19. Answers
    3
    Views
    428

    47425

    47425
  20. Answers
    2
    Views
    270

    Check pushrods , and or valve clearance .

    Check pushrods , and or valve clearance .
  21. Answers
    4
    Views
    437

    Good Job :)

    Good Job :)
  22. Answers
    4
    Views
    437

    Remove air filter and spray a little carb cleaner...

    Remove air filter and spray a little carb cleaner in throat of carb.
    If it starts for a second still fuel trouble , if not check for fire .
  23. Check the diodes going to the coil .

    Check the diodes going to the coil .
  24. Check your block breather , sounds like its...

    Check your block breather , sounds like its clogged . Or could be oil ring.
  25. Sounds like the solenoid is bad . Not starting ?...

    Sounds like the solenoid is bad . Not starting ? Would help if we had a model and serial number .
  26. Answers
    2
    Views
    374

    Sounds like needle valve in carb is stuck....

    Sounds like needle valve in carb is stuck.
    Removed carb check or replace needle valve.
  27. Answers
    2
    Views
    542

    Have you had either one of the back wheels off ?

    Have you had either one of the back wheels off ?
  28. Sounds like it has a air leak on the intake....

    Sounds like it has a air leak on the intake.
    Check and make sure carb is bolted down tight ,then check isolator that carb bolts to.
    Remove top cover start saw and spray around the carb mounting...
  29. Answers
    2
    Views
    305

    Make sure the head gasket isn't blocking the oil...

    Make sure the head gasket isn't blocking the oil return hole in the head.
  30. Answers
    7
    Views
    596

    Check the high speed rpms , and make sure its...

    Check the high speed rpms , and make sure its running at max , speed,
    But its on the engine side not the generator.
    It does sound like carb trouble.
  31. Answers
    3
    Views
    495

    Replace fuel solenoid on carb bowl.

    Replace fuel solenoid on carb bowl.
  32. Answers
    2
    Views
    397

    If it's a auto choke ,could be the spring on the...

    If it's a auto choke ,could be the spring on the choke
    Pull off breather and housing , u should be able to see all then.
  33. What model troy bilt do you have ?

    What model troy bilt do you have ?
  34. Remove and clean carb or replace Also if there's...

    Remove and clean carb or replace
    Also if there's a fuel solenoid on carb check that
  35. Answers
    2
    Views
    335

    Replace starter clutch

    Replace starter clutch
  36. Question: Polaris 250 blazer

    by DG
    Answers
    1
    Views
    421

    Polaris 250 blazer

    Polaris four wheeler not starting
    Fuel not getting to spark plug
    Fills up bottom of crankcase.
  37. Question: Polaris 250 blazer

    by DG
    Answers
    1
    Views
    421

    Polaris 250 blazer

    Not starting ,fuel going to bottom of crankcase instead of spark plug , spark plug dry,
  38. Answers
    3
    Views
    434

    You set the timing by moving the points in or out...

    You set the timing by moving the points in or out .
    There is a sight window on the blower housing , look through the hole find the S on the flywheel mark with white chalk .
    Set at idle using...
  39. Answers
    1
    Views
    654

    Rod should be on left side of deck. When...

    Rod should be on left side of deck.
    When released should be loose enough to put belt on.
  40. Answers
    2
    Views
    790

    Take muffler off and look at the exhaust ports....

    Take muffler off and look at the exhaust ports.
    Premium gas bad , need low octane.
    Higher octane will run to hot and score cylinder.
    Check fuel lines and make sure there are no cracks.
    Could be a...
  41. I agree with Clarke, But I would also have the...

    I agree with Clarke, But I would also have the valve clearance checked.
  42. Answers
    1
    Views
    417

    Needs to be flashed , take it to a dealer and...

    Needs to be flashed , take it to a dealer and they should be able to do this.
  43. Question: Valves

    by DG
    Answers
    1
    Views
    395

    You have to remove them , grind them down and...

    You have to remove them , grind them down and check them a little at a time.
  44. Answers
    17
    Views
    1,839

    I've been running mine for four years without one...

    I've been running mine for four years without one .I work on newer mowers every day some have it some don't .
  45. Answers
    17
    Views
    1,839

    Not true

    Not true
  46. Answers
    17
    Views
    1,839

    Doesn't take much in the carbs now days. I soak...

    Doesn't take much in the carbs now days.
    I soak them over night , works most of the time.
    Might take the fuel solenoid out cut the tip off and put it back in.
  47. Question: b43g onan engine

    by DG
    Answers
    1
    Views
    1,189

    Check for oil leaks ,engine could be sucking air...

    Check for oil leaks ,engine could be sucking air in , which would cause pressure in crankcase instead of vacuum .
  48. Answers
    7
    Views
    1,310

    I agree with Crigby. I wouldn't cross any wire...

    I agree with Crigby.
    I wouldn't cross any wire unless I was sure what they go too.
    Could be the brushes are wore out.
  49. Question: Weedeater head problem

    by DG
    Answers
    3
    Views
    760

    Check and make sure grass didn't wrap around top...

    Check and make sure grass didn't wrap around top of head.
    Does motor still rev up ?
  50. :)

    :)
Results 1 to 50 of 500