Search:

Thank you I had not realised that ask me was US. Will look more closely at forums for accurate relevance in future to make sure questions are being posed to the correct forum

Thanks for the info, although noticing you are both US based my queery is for UK. Perhaps I should have clarified this point in my initial question if it makes a difference.

Just one thought has occurred to me, does the fact that they are optional make a difference. i.e. they only pay if they wish to.

Thank you for the clarification

If I was to offer services and/or products for optional donations - customers paying what they thought the product or service was worth would the donations be taxable if they are the only source of...

No it is much closer to my picture posted yesterday and yes it does fit to copper pipe. But thanks for the info I only used 3 wraps so it looks like you've answered my question. Thanks

Again no it is like my picture the problem is a small leak from the coupler/tank join possibly due either to me not applying enough ptfe tape or because there should be a gasket. To clarify I am...

No its like the attached picture but with compression fitting to the pipework rather than push fitting. The screw thread to the tank

In connecting a new hot water cylinder the male coupling connector to the tank for the cold water inlet pipe has a small leak - is this simply due to insufficient PTFE tape or should there be a...

Yes had contacted both hp and Microsoft neither were any help. Have though found downloadable software called "vuescan" from VueScan Scanning Software. You can get a trial version to check that it...

Have upgraded to vista operating system but it doesn't recognise my hp scanjet 7400c scanner. Have downloaded driver update from the hp web site which is supposed to allow basic functions to work but...

Thanks for trying to help and apologies for the delay but no adjusters on top bar garage eventually managed to reset light with help of a honda dealer. There must be some peculiarities with this...

How do I adust the alignment on a 1995 (M reg) Honda Accord Aerodeck Estate. It has failed its MOT for nearside headlight aiming too low. I can't find any adjusment mechanism.