Search:
Type: Posts; User: minibike6969
Search:
Search took 0.01 seconds.
-
i have a vz21 small engine turbo that i want to use,but my problem is how do i get the oil to flow through the turbo i tried everything.so does the turbo need to be running for oil to flow through it...
-
i bought a harbor freight 212 cc 4 stroke engine,i took the speed governor out of it and now the timing gear PLEASE ANYBODY HELP ME WITH HOW TO SET THE TIMING GEAR
-
i have 125cc chinese engine with a pz carburetor the problem i am having is when i throttle up then release the engine stays at a high rev then it starts to slow down and it does it everytime i rev...
-
how long should the throttle cable be from the bottom of the screw cap to the end of the wire. for a pz20 carb
-
i have a 110cc 3 speed semi-automatic chinese engine that will not downshift while engine is running but will downshift with engine off.so can anybody help me with this problem?
-
hi i'm trying to build a one piece concrete box fountain and what i mean by box is one box on top of the other box,so i want to cast it in one piece but dont know how to build the forms to do that...
-
i saw in a toyota junkyard online that a 98 toyota tacoma wiring harness was the same as a 96 wiring harness is this true? also would u know how to wire a two prong element heater with one element?
-
i have a 96 toyota tacoma that was gave to me with electric problems,it turn out to be that somebody had cut away the fuse box from the harness.so i have been to every junkyard in my area and have...
-
i;m trying to install a new ign switch but not sure what wire goes where
( WIRES )
green
brown
red
black
black w/white stripe
brown w/white stripe ...
-
i was wondering if a small block 350 engine and trans would fit in a 96 toyota tacoma i know i would have to change the rear axle what axle could be used if it can be done at all?
-
hi i'm building a christmas light show its my first and i'm not sure how to set the delay times for each string of lights i want each string of lights to blink once one after the other then all at...
-
i figured out how to write the code.i'm building a light show this christmas,and i need help on setting the delay time on the lights.so i want each string of lights to flash ones then all at same...
-
THIS is my frist time trying to write a sketch code for my arduino.so can anybody give me a step by step instructions on how to write a sketch code for EIGHT single channel relays.
-
I'M BUILDING two eight channel christmas light controllers with single relays.so my question is how do i power all eight single relays with one arduino.
-
i have a harbor freight 125 amp flux-core welder,and the problem is when i feed the wire thru the line it gets jammed somewhere in the line.is there a way to clean out the wire line.pls help
-
no ground to water line, but the two wire electrical system jacket is metal
-
I HAVE A samsung home theater receiver that the metal jacket has become entergized,can this problem be fixed
-
i pluged in a circut tester and the light came on saying there is a open ground,and i see nothing as far as a ground wire going to earth copper rod,also if i were to add a ground wire to the...
-
hi i would like know if a ground wire can be ran from the neutral bus bar inside the main panel to a ground electrode.
-
got a ohms reader no remote
-
i have a samsung dvd home theater system HT-WX70 player that a couple of speaker outputs are not working can anybody tell what might be the problem.also what would cause the casing of the dvd player...
-
the wiring is on a chinese 110 cc engine and im trying to wire the gear sensor to a speedometer with idiot lights,but will use one or two light and connect the gear wires to the other lights
-
if anybody knows about the wiring of a gear position sensor plz help.i have a 5 wire gear position sensor and not sure what wire goes where.( dark grn/blk stripe ,lt grn/red stripe,blue/red...
-
I'M trying to install a new throttle cable but having no luck.so the problem is that
the cable outside jacket keeps moving when i twist the throttle
-
I have a 110cc engine with three fwd gears and one rev .i can't find a clutch cable on this engine or it doesn't have a clutch PLEASE HELP
-
its a new stator4930849308in the wiring connector of my cdi box i tried to measure the resistance between ac ignition power pin and ground pin got no reading what this mean
-
i have 110cc chinese engine,my problem is my stator it bolts to the inside of the cover and when i install it it feels like a magnet grabs it and sucks it in,also when i bolt the cover back on and...
-
i am reinstalling the camshaft but only one has a timing mark the exhaust cam and the intake cam no timing but has sprocket pin on cam how would i get them both on TDC
-
I WANT TO KNOW IF ANYBODY can tell me how to reduce engine braking on a 90cc 147fmf automatic 4 stroke engine
-
what i mean is when i let off the throttle the internal friction of the engines moving parts will create a bit of inertia which is then applied to the rear wheel causing the motorcycle to slow down...
-
I have a 90cc 4-stroke auto engine,and i want to know if there is a way to reduce the engine braking on it,if it can be done please send info on how and what to do or what web site. THANKS TO ALL WHO...
-
also could it be my steering system because there is no resistance in the system. meaning that its a very loose turning but tight spindle system.
-
do both tie rods need to be same length?
-
hi i have built a running 4wheel atv with front wheel problems. when i'm riding at full throttle the front wheels want to jerk left and right real hard,so what would be the problem for it doing that...
-
i have a 2 stroke carburetor with a bowl on a 49cc engine.the problem is that the fuel will not stop coming out the overflow tube,i've changed the float and needle yet it still comes out the overflow...
-
on a 96 honda civic what timing marks need to be lined up with the camshaft,the mark on the timing belt drive pulley or the mark on the crankshaft pulley also does the engine turn counterclock or...
-
Does the timing belt drive pulley and camshaft pulley marks need to be lined up when setting the timing?
-
I have a 96 honda civic and wanted to know when reseting ignition timing does the pcm plug need to have a jumper wire to set timing?
...
-
No it's a chinese 90cc complete engine version 6
-
I have a 90cc 4 stroke semi-auto engine and need help to adjust the clutch so that the engine is not braking when I release the throttle.
-
I have a pz26 carburetor with a port on the choke side of carb just above the mounting end of carb not sure what connects to. PLEASE HELP49139
-
How do I test a 6 coil 4 wire/plus ground stator? Wire colors-blu/wht,blk/red,yel,wht and green.
-
I have a 15 pin connector wire colors (red,blue,yellow,white,purple,gray,brown,orange,and green) that I want to change to a usb connector (red,black,white,green).so I'm not sure what wire to connect...
-
I'm adding a three wire ( red,blue,brown) tail/stop light to my pocket bike with some problems. The problem I am having is when I have the lights on my brake does not work,but when I turn them off...
-
I have a 49cc 2 stroke engine that will not start. I have a good spark,new carb,and spark plug is wet,so fuel flow is good. Also it will start some times but after that it does not start anymore....
-
My car is loseing cooling fluid,but there is no leaking fluid and the car does not overheat,but I have to always add water to raditor. PLEASE HELP
-
Hi I'm trying to build a small electric cart using parts from an old power chair,but I'm stuck at how to wire the power control module. What I mean is where and how to wire in the throttle wires to...
-
I have a craftsman pressure washer and the problem is when I start it with choke on and it starts but soon as I open the choke it cuts off?
...
-
Replaced open circuit relay and pump still not coming on so now where do I look for the problem
-
Found the problem was the circuit opening relay
|