Search:
Type: Posts; User: sledgehammer
Search:
Search took 0.00 seconds.
-
what kind of material are you cutting?
plywood, 2x8?
-
You suspect correctly.-New rad cap pretty inexpensive-Paul
-
On older homes with original hardwood floors I used to find tarpaper (roofing Paper)
Between the hardwood and the sub-floor.
-
You have the right idea. 45 degree joint, drill a dowelplug hole(make sure you have the dowelplug size 1st e.g. 3/8",1/2"), and predrill a pilot hole underneath rail prior to assembly.. Use plenty...
-
Wood screws, and plenty of 'em.
-
Ask at home depot for a suitable cleaner, CLR , or something.
I find grout hard to match, I think it would always look like a patch job.
You can get a grout remover, kind of like a small knife/file...
-
Sure you can! If there are studs behind the panelling. You can buy switch and receptacle box extenders (check local bylaws) to bring the receptacles,switches out flush.
I'd use 1/2" drywall.-Paul
-
Check coolant level. If low top it up and find the leak.
Assuming the fan is working, warm up the vehicle to operating temp , turn up the temp, choose defrost, and chech the hoses in amd out of the...
-
Coolant level low. Top it up and see where it is leaking.It blows cold air because no coolant is getting to the heater core.
-
Replace igniter module, with new.
Tach works runs OK, finally.
-
Daytime running lights have been required in Canada since 1990.
-
1990 honda accord 2.2L.. Cranks,but no start /no spark, picked up used dist at wrecking yard , still no start. Went back to wreckers for another used distributor..
Swapped distributors... ran , but...
|