Search:
Type: Posts; User: JungleCat
Search:
Search took 0.00 seconds.
-
I made a table using a piece of juniper which was dryed out. I coated it with 3 coats of varathane and now 8 months later there seems to be bugs in the table. As Juniper is a termite resistant wood...
-
I have made yellow cedar benches and covered them with 2 coats of varathane natural oil finish clear #66. They are for outdoor use should I leave it like this or coat it with some kind of other...
-
I have 2 yellow cedar slabs which I am making into outdoor benches. I want to make the benches done with a clear that will last as long as possible. They will be placed outside all year including...
-
Oil Based varathane is being discontinued and will be illegal to get in Canada due to environmental concerns.
-
I have been using varathane oil based 900 gloss varnish on log furniture which I have built. Apparently this is now no longer being made due to environmental concerns. Does anyone know of a good...
-
Well it was outside but under a tarp for and off the ground for the winter and on dry days now I uncover it. There is no kiln around. I usually leave most of the bark on it for looks.
-
I have a hugh spruce burl which I cut in 2. It is about 3 feet wide at the center which is cut and about 3 feet high. I place the 2 halves under a tarp for the winter. It was cut in September. It is...
-
I have several western red cedar slabs with which I wish to make into outdoor tables. I would like to know what would be the best finish/cover to put on it. I would also like to know if I could not...
-
I have a duel axle home built trailer and at 80 kph it starts to fishtail on curves. At 90 kph it starts on her own. A friend suggested that I try getting a longer receiver (about 2-3 feet) Will...
-
I have a dometic propane fridge in my camper and it is not working. There is also a strong amonnia smell coming from it. I was told by a person who claims to be knowledgeable that the smell is from a...
-
I have a dometic propane fridge in my camper and it is not working. There is also a strong amonnia smell coming from it. I was told by a person who claims to be knowledgeable that the smell is from a...
-
Is there any abrasive I could use on the disc sanders? That is the tool that I need for this type of work.
Bob
-
I am making log furniture and using both black and decker and porta cable 5" disc sanders. The sanding discs will not stay on the pads and keep on falling off. I tried using blue line sialink disc...
-
Hi. I am going to buy a riding lawn mower and want to spend under $3000.00 I am looking for one that is a direct drive as my property is hilly. Any suggestions?
Bob
-
I just got off the phone with the contractor and he said that I should wash the walls with muratic acid and then hose the walls down. Can this be right?
Bob
-
2 years ago I had a cement wall built and when spring came there where hugh white spots on the cement taking up about 50% of it. I called the contractor and he said it was curing. This year I have...
-
I have a porta cable and dewalt 5" orbital sander. The sand paper that are hoop and loop just do not stay attached with the felt backing. As I am using them on log furniture I need a peel and stick...
-
-
I want to make a coffee mug for show only. So to do it I need the center drilled out smooth. The firstner bit seems to want to burn through more than cut and is extremely slow. The bit is new and...
-
I want to hollow out a pine log about 5-6 inchs wide. I tried a 3 inch forstner bit and it just will not do the job effectively. I only want to go down about 5 to 6 inches as well. Any suggestions?
-
So the phone calls keep on coming. Is there a form letter somewhere that I can send telling them to cease and desist? If I do send a letter do I mention in it about the statute of limitations just to...
-
Can they come after us individually or do they have to come at us separately as it was a joint account?
Bo
-
I have a Porta Cable and a Dewalt orbital sander and I make log furniture The face plates on the things continue to refuse to hold the felt backed sand paper after the plates are used for a bit. I...
-
-
Thanxs again, out of curiosity at what point in time does the statute of limitations start at to get to the 6 years IE: From the time of the last payment or the time it was sent to the clloection...
-
Thanxs. How many times can they take us to court on the same issue?
Bob
-
We lived in Ontario and had a line of credit with Canada Trust. We moved to B.C.and the line of Credit followed us to B.C. . We owed about $16,000. On our Visa line of credit. When canada trust...
|