Search:
Type: Posts; User: Wolf
Search:
Search took 0.00 seconds.
-
I agree with tkrussell.
It sounds like 1 switch went bad and when they were changed 1 or both got wired wrong.
If that is not the case than 1 of the new switches is bad.
-
Yes the curly white wire from the GFCI goes on the neutral bar but the neutral on the GFCI circuit goes to the GFCI breaker it has a place on the bottom to attach it behind the Hot wire.
-
Ok sorry for the delay.
I was not able to find out what brand or model #
But it dose run 3 speeds both directions.
-
There was 1 green I put with a green
There was 1 grey I put with a grey
There was 1 purple I put with a purple
There was 2 blacks I put 1 with the black on the L
There is 1 black that is not...
-
The stacked switch had holes for 8 wires 2 for L , 2 for #1 , 2 for #2 and 2 for #3 it was wired with 1 wire in each L and 1 wire in #1,#2,and #3 for a total of 5 wires. I did not check to see if...
-
I have a stacked switch that will hold 8 wires there were 2 black 1 grey 1green and 1 purple. Some one replaced it and got it wired wrong the fan stayed on low and the switch would not effect it.
I...
|