Search:
Type: Posts; User: mdmaynard
Search:
Search took 0.00 seconds.
-
I have a Murray 40508x92 40" riding mower. The housing (spindle/mandrel/jackshaft) has been damaged. I am trying to remove this part from another parts mower I have.
I have removed the blade...
-
-
Mailing address
Martin Maynard
4855 Spring Creek Road
Mannford, OK 74044
-
Email address or mailing address.
-
I am looking for manual for this model as well, has anyone had any luck obtaining one? I do not care if it is just a scanned copy, I just would like to have one.
-
Has anyone had any luck obtaining manual for this mower (40508x92)? I would love a copy
-
Thanks for the feedback.
I hope it was just a bad connection or bad thermostat...
I have sent honeywell an email.
Again thanks for the feedback.
-
If it was bad thermostat wouldn't the thermostat be burnt up? Just asking as I want to figure this out.
I really need to find out the load rating of thermostat...
I am running a 3500 watts...
-
The paperwork that came with Thermostat does not say either.
I ask the overload question because the thermostat I am replacing had some problems. When I pulled it out the to line side wires were...
-
I am trying to find out the wattage the following thermostat will handle:
Honewell CT410B
I just bought to feed three baseboard heaters with a total wattage 3500 watts. Want to make sure this...
-
Greetings all once again. I know this post is a couple years old but ran into a problem with this installation.
January 3rd, 2010 we started having brown out and stuff that was 220 (dryer,...
-
Yes, a lot of work and I do see why they charge what they do... you go beyond wiring and need to know some construction, unless you are fortunate enough to wire up everything before interior is...
-
Update:
First few nights of weather below 20 degrees... base board heaters worked out well. Thanks again for all of your inputs.
What a great resource this site is for us DIY.
-
What a project!
It is now complete, I appreciate everyone's input.
I have baseboard heaters in all the rooms and went with using 4 thermostats. 1 to control the two small bedrooms, one to...
-
After much thought I decided to go with (3)20 amp breakers using 12/2 wire. I just ordered 300' of that.
Here is the layout I plan on using (I am showing just one line, knowing there is two hots...
-
Okay I have 2 more 4-footer I can use.
The image below shows me using the other 2 heaters (one in hall facing into bathroom and one in kitchen) there is no wall space in eithe rbathroom for a...
-
I am in North Central Oklahoma, USA (Mannford, Oklahoma to be exact) Walls are made with 2x4 if that helps any. Also I will be locating all the heaters on exterior walls.
A correction to my...
-
Greetings All!
You were so helpful during my installation of 200amp breaker box and I appreciate it.
Now with winter just around the corner I need to worry about heat. At this point I have no...
-
Greetings all!
I have a 15 amp GFI breaker that trips anytime something is plugged into any of the outlets on that circuit.
I have used a circuit tester and it appears everything is normal...
-
Thanks for the help. I was using half size breaker, moving didn't help. I purchased a regular size breaker it that did the trick, dryer works like a charm now.
I appreciate your help!
-
Thanks for the input.
I tested black across red and got 0 reading, black to white got 120 and red to white got 120. So does this mean there is a problem at my breaker? If I test across black and...
-
How do I test for 240 volts?
Using the meter do I put on probe on the black and one on neutral to see what the meter reads?
-
Greetings my friends!
I thank you for previous answers to earlier posts.
I have acquired an electric dryer. The wiring previously was 3 wire (black wire, white wire, and bare ground). Since...
-
Greetings Gang!
I have acquired some electric baseboard heaters from my sister. I have taken them apart trying to find some writing as to wattage so I can figure what type of wire I need,...
-
Thanks for the response.
No this was not for the underside or mobile, this was connecting a couple sockets that had been spliced so many times by previous owners I wanted to clean it up a bit and...
-
I am needing 14/2 wire and while shopping at lowe's I found Romex 14/2 NM-B wire (outter sheath white in color) On the same aisle I found 14/2 WOG wire
I am assuming the 14-2 NM-B wire is what I...
-
I am going to sound really ignorant here but what is the difference between 14/2 NM-B wire and 14/2 WOG wire? (is WOG without ground?).
-
done, firm believer in smoke detector and carbon minoxide detectors
Still no power to section of double wide furthest from panel. I will continue looking to see if there any other places that...
-
We are trying to get a doubl wide ready for us to move in.
We ran the service wire from the pole to the breaker box in home. In the back part of the double wide we found two round electrical...
-
Whew, long day!
With your help the electric was hooked up, and yes I used a bushing and 2" pvc conduit coming out of the ground. Thanks for all your assistance!! And may I say thanks again!!
...
-
Attached is pic.
So should one 4/0 go to left lug and the other go to the right lug, and the ground and neutral go to the ground bar at the left of the box. Is this correct?
-
I connected the stripped 2/0 wire to neutral in box, one of the 4/0 to the ground in box, the other two 4/0 went to the main lugs in box.
At the meter disconnect I am a bit confused. It is a 200...
-
I am beginning to understand why it takes a real electritian to do these things now :-)
I appreciate your input and help. Now I just have to sell the cable I bought so I can buy the correct stuff...
-
So, would it be better for me to scrap the wire I have and just purchase "trailer" cable. I paid $2.27/ft for the 3-wire, what is the cost difference between the 3-wire and "trailer" cable?
The...
-
Yes it is direct burial wire. When I told the gentleman at the supply store what I was wanting to do, the 3 wire direct burial (4/0 alu) is what he sold me with separate ground.
Here is what I am...
-
Argh!! I was running the service wire (#4/0 alu 3-wire; #4 THHN) from the pole to the newly installed 200 amp panel inside the house and I am 15 foot short.
The wire makes it just inside the...
-
Whew! Thanks for the clearifcation :-) I was worried I was all messed up.
I appreciate what you guys do here, helping others. In all sincerity I appreicate it very much!
-
I purchased PowerMark Gold™ Load Center Indoor Main Breaker Load Center 200 amp Main breaker 32 circuit from Lowe's, you can see same panel at this link:
200 Amp Main Single Phase 32 Circuit Panel...
-
I appreciate your input and have taken your advice.
I purchased G.E.'s 200 amp main load center kit. (came with 10-20amp breakers, 1-30amp. And 1-50amp).
I went to a local supplier to...
-
Greetings!
I live in a rural country area. The electric company will be installing a pole, meter, and 200amp service with disconnect at pole. (It will require 50 foot run of service cable from...
|