Search:
Type: Posts; User: 98accord
Search:
Search took 0.00 seconds.
-
So here is my solution to my furnace problem.
I ordered a universal replacement Control Board (ST912ou1011) from HVAC Parts Outlet which is meant to replace my OEM board.
I connected it according...
-
So I bypassed the stat and ran the tests you suggested.
I can get the inside fan to go on, the heater to go on, I can get the AC outside fan and compressor to go on, But when I connect the AC...
-
Do I use another wire to connect R to Y to G? Or do I connect the R to the Y and the Y to the G and R remains unconnected?
So right now the R from the furnace is connected to Rc and Rh. The...
-
That is probably the case because I did notice the black wire that connects to the Rc or Rh was loose at the furnace
When referred to the fan, I've been referring to the Furnace fan...
-
I should say that when I first tried to turn the AC this year, the fan stopped working and a technician replaced the transformer. This happened a couple of weeks ago.
I made sure the connections...
-
It took me a while to get back to this subject.
My t-stat has a battery and it has Rh and Rc which are connected together.
At the t-stat
Black - RC
Red - RH
- RC and RH are connected together...
-
Thanks Kiss, so is your suggestion to just replace the thermostat? I'm getting my thermostat replaced by my power company /PeaksaverPlus.
The thing is that I need everything to be in working...
-
I'm having the same issue as all of you. Has this solution worked for everyone? I will have to research first what your saying exactly :) and then I'll post my results.
-
Sorry to be asking this question again, but I couldn't find the main relay under the dashboard. I have a 98 accord 4 cylinder. The earlier models apparently needed to have the cruise control relay...
|