Search:
Type: Posts; User: 7up
Search:
Search took 0.01 seconds.
-
I've tried that and nothing but also I'm not getting sound from my internal speaker either.I also just installed a new graphics card and that's when the sound went out
-
I have a desktop DC7800 SFF HP computer with no sound, as far as I know all the audio drivers are installed.so if anybody can help my solve this problem please do. (os0 WINDOWS 7 PROFESIONAL 64 BIT...
-
I have a DC 7800 SMALL FORM FACTOR desktop computer and I'm looking for a low to mid price graphics card but not sure what card to get. Simulator games will be played mostly
...
-
-
I have a 1990 PW80 yamaha motorcycle and the carburetor has missing hoses.I'm not sure where the go to,so can somebody send me a diagram of the carb and hose connections .
...
-
I have a EVGA gforce fx 5900 ultra graphics card that I am trying to find a driver for it.I've been to nvida web sight,evga web and no luck so if anyone can help me find the driver please do. also...
-
none of my games play at all on my video card that's why I want to upgrade it but not sure what to buy I'm looking for a middle end card somewhere under $100.so if u can tell me the spec to look for...
-
I'm looking to upgrade my graphic card and the cpu on my desktop PC.my graphic card is a PCIEXPRESS GDDR3 and my CPU is LA775 SLOT on a COMPAQ PRESARIO SR2011WM desktop.now as for the games I play on...
-
It has crashed a few times on its side,yes I have checked the flywheel and replaced the key. Now does the magnet on the flywheel need to always stop under the ign coil?
-
Why are u looking at this question your in plumbing
-
-
I have a predator 212cc engine, the problem is when I go to start the engine the pull start is so hard to pull out that it lifts the back end of the mini bike. So what would it to be so hard to pull...
-
The engine is on a minibike,so the sooner I fix the problem the sooner I can ride it.
-
I have a predator 212cc engine from harbor fright.the problem happens sometimes but not all the times.when I try to pull start the engine it does not pull, instead it pulls the cord back in. what...
-
There is a manifold at the rear of the car with brake lines going to it with a spring loaded lever I'm guessing it goes to the ABS system
-
There is a device that the vacuum line from the engine connects to that other lines connects to.it sits over top of master brake cylinder a small black box and supplys vaccuum also to brake booster.
-
Has no ABS on it and no leaks
-
-
I hehave a 99 ford taurus with brake issues,I've replaced the brake booster,master cyclender ,and bleeded the brakes.yet when car is off there is presuure in the brakes but when car is running there...
-
Can any body tell me what other music games for PS2 that will work with a wireless drum set besides BAND HERO.
-
-
Problem solved it was the wrong game,does not work with guitar hero
-
I have a 98 ford taurus ,so can anybody tell me the size of the FRONT ISOLATOR ENGINE MOUNT bolt.
-
I think I found the problem (RECEIVER#95481.806///(DRUM SET#95481.805)do the model number have 2 match and on the back of the receiver should it say PS2/PS3 or just one or the other?I'm using the...
-
I have a interactive golf game controller that plugs into my PS2 usb port and it works fine
-
I just finished building a go-kart from scratch with a 6.5 horsepower gas engine,so what it is doing is upon takeoff I get real heavy vibration in the rear end so I have to let off the gas to smooth...
-
I just bought a wireless drum set for ps2 and I plug the receiver in the red light does not come on.but when I plug the receiver into my computers usb it works .so can anybody help me fix this
-
I think I've found the problem,I measured the primary ign plug on the coil pack and it was 08.6 ohms on all of them,then I measured the six plug towers on the coil pack it was 11.5 kilohms. These...
-
I have a ford taurus 2005 with transmission trouble.when the car is cold the trans shifts normal,but after a while of driving and every time I come to a stop and then start driving the trans has a...
-
I have a 2007 chevy uplander with a 3.5 litter eng.the problem I'm having is oil is leaking from around the bolt that holds the oil filter housing to the engine block also there is a small hose...
-
Thanks for the info and I've poured concrete slabs just have not done any ramp or ramp forms
-
I'm building a small concrete ramp between a center block wall and the house but not sure how to build the forms for the slope.
-
I have a 90amp flux wire welder that the motor went out.I've have replaced the motor but now when I press the trigger nothing happens,so I disconnected the motor wires and hooked them to a multimeter...
-
I have a 99 ford taurus that I replaced the power steering pump,and now when the car is running and I turn the wheels left and right the pulley on the pump will stop moving for a second.please can...
-
The rectifier holder has burn marks around all of the connection points of the diodes.
-
One last question if I connect a multi-meter the pos to battery post and the negative to a diode I should get a reading right and if no reading its bad.
-
How would I check the diodes with a multi-meter?
-
I took it to autozone and they tested it and said it was bad,but didn't tell me what was bad just that it failed.also before i took it out the problem was that it would not charge the battery.
-
So I should have the washer drain stack go vertical down into a p-trap and then horizontal about three feet into a 90 degree elbow and then leave the sink drain on the tee below the 90 degree elbow...
-
I took regulator off and the brushes still look good
-
The vent pipe is cast iron and is inside the wall.so the sink tee should not run into the p-trap like my pic shows,also should the drain pipe be 2in instead of 1 1/2in?
-
I have a 1999 Ford Taurus with a bad alternator. At this point and time I can't afford to replace it, so my question is I have an AC Delco alternator with a two wire internal regulator, and with some...
-
My washing machine drains up into the utility sink and now the sink won't drain.I've snaked the laundry and kitchen drains.45789 i've added a photo of the laundry drain system.pipe size is 1 1/2 inch.
-
Pvc,catalytic converter,fuel injection,vacuum line connections,fuel cap functional,MIL,ignition spark controls,O2 sensors and connectors,other emission related,fuel evaporative controls,fuel tank cap...
-
So how does the emission test fail at 15mph and pass at 25mph?
-
First emission test: 15mph NO(ppm) MAX 459, AVE 67, MEAS 897 (FAIL)
25mph NO(ppm) MAX 746, AVE 62, MEAS 167 (PASS)
Second emission test:
15mph NO(ppm) MAX 459, AVE 67, MEAS 587 (FAIL)...
-
I have a 1999 chevrolet cavalier 2.4L DOHC 4cyl, that has failed an emissions test twice. I've changed the air filter, and spark plugs. Also I connected an OBD2 reader and it came back zero codes,...
-
I'm having some drainage problems with my washer,I rented a 100foot electric snake and ran it through the washer drain line,and yet my utility sink still fills up when the washer drains.so my next...
-
Can anybody give me a step by step instructions on how to remove the security shield from a desktop icon,and also what it means and why it's there. THANKS
-
I'm making a potter's wheel with a 24VDC motor and wanted to use the foot pedal to control the speed
|