Search:
Type: Posts; User: boranjmmt
Search:
Search took 0.00 seconds.
-
I own a new levered corkscrew that keeps pushing the cork into the bottle. The screw is plenty sharp and the device is correctly assembled and operates normally. Anyone had this problem?
Thanks....
-
Model IRD470002. Drain hose is clear. Additional suggestions?
Thx.
-
Model 45A. 1/4 hp. Chain drive. Plugged in but not working at the switch or by remote. Light does not come on either. Is there anything I can check or do I need a technician?
-
Thank you. That is very helpful information.
-
Thanks. I turned water back on and saw no leaks. Water is cycling into tray but doesn't freeze. Do I need a new ice maker?
-
I have a kenmore refrigerator whose ice maker stopped working. There was no water getting past the solenoid so I replaced it. Now I have water to the ice maker but it won't shut off. I had a...
-
Thank you. I will use your suggestions.
-
Drum turns. Ignitor replaced. No flame. Is there a heat element or coil in a gas dryer? Should I be looking for a flame near the ignitor?
Thanks for any suggestions.
-
Thank you FBE. I will see my neighbor again on Wed and will use your suggestions. In the meantime, while my neighbor has an appliance that won't heat up, I have a 7 yr old GE refrigerator model...
-
I'm trying to help a neighbor with a Kenmore gas dryer that is not heating up. They have replaced the ignitor and it seems to be working but still no heat. Any suggestions?
Thx
-
Thanks. I removed the strip but found only the holes for the strip screws.
-
Here is a picture that closely resembles what I'm working with:
Endura Outswing Threshold - Mill Style Finish : Door-Thresholds.com!, Your Door Threshold Superstore
The only difference is my...
-
Thanks for the picture. We are not talking about the same kind of threshold. Mine is under a entry door and is adjustable. It is covered with a vinyl or rubber except for the adjustable strip. I...
-
Roger that. I think we are talking about the same thing. The vinyl covers the aluminum threshold. I will try removing that and looking for screws. Thanks again.
-
Thanks for your response. The aluminum is covered with vinyl if that's what you mean. I'm wondering if I can cut it down the middle and remove each side that way.
-
I'm replacing a aluminum threshold. How do I remove the old one? There are no screws and the threshold ends run under the door frame. Do I need to remove the door casing?
|