Search:
Type: Posts; User: yenot75
Search:
Search took 0.00 seconds.
-
There are a lot of different things that can cause this... Did you check the fuses?. Does it turn over and not crank?. etc...
-
1987 Toyota P/up 4x4 has a 22R engine... Will a 20R fit in it and if it will do I have to use the intake and manifold from the 20R or will the 22R components bolt up?.
-
Thanks for your help... I found out that it does initially need to be filled and it holds 3.5 qts... The weep hole lets the fluid gradually flow back and forth as needed...
-
I've just replaced the transmission in a 96 Tahoe 4x4, 5.7ltr. I drained the transfer case when removing. Do I need to add fluid back to the transfer case or will the pump from the transmission...
-
Not very hard. Once you remove the back of the dryer, depending if your element is mounted on the back or beneath the dryer. Usually several screws hold it intact and it can easily be removed for...
-
Sounds as if the capacitor in your outside unit may be bad... It's best to have an experienced HVAC Technician look at it if you have limited electrical experience. You can get shocked.
-
Hi,
It depends on how accesible the wiring and even the plug is. If you can get to the wiring and there are only 2 wires then you can unplug and run a jumper to each side. If you no longer want...
-
Hi
You could possibly have another problem. Your breaker could be old/worn and in need of replacement. My gut tells me the element in your dryer is shorting out or is on its way to, needing...
-
Hi,
You should be able to gently pry the top part of the dryer open. If not there should be some screws inside the front door that can be removed so the front can be slid up and off.
|