Search:
Type: Posts; User: corrillo
Search:
Search took 0.00 seconds.
-
What kind of shower body do you have is it three valves or single handle try taking off the shower head and put a cap on the threads you would need a 1/2 cap turn on shower only and see if water is ...
-
Go with he crimp connectors if tou are talking aboutashark bite connectors they are not allowed behind walls in some towns
-
They sell a product called backing rod it is like foam you can find it in home depot you out that in the caulk but I would try to look ender tub from below if possible and see why you are getting...
-
The easy way is a good shop vac hold a towel over the overflow put the hose over the drain as tight as possible and turn it on should suck it out
-
There is a ignitor in the oven that has two wires on it when they go bad the oven will not light if you go to a local appliance shop with your make and model they can give you the part you need runs...
-
I have used the peroxide straight I take a cutip and dip in the cap and squeeze it in my ear hold your head to one side and wait for the fizzing to slow then turn your head the other way into a towel...
-
Truck stays running when I am driving and lights comeon truck loses power and I can't get it over 65 tach also drops to zeroand sometimes bury on red zone
-
Check engine trans temp wait to start
-
I wouls see if your local plumbing supply has what they call a husky clamp and put that on instead of a fernco ferncos do not hold up well in concrete being they are rubber the husky clamp has metal...
-
First you must go to gas meter and turn off gas then with pipe wrenches you take off old gas valve and put pipe dope on threads screw on gas valve and tighten well. Make sure gas valve is off. Then...
-
You have to remove the handle and faceplate of shower body and you will see were the diverter is screwed in just unscrew it and replace you can purchase the diverter from home depot or any local...
-
In the ceiling box there is probably two black wires one is hot all the time and the other works with the switch you need to get an eletric tester and see wich one loses power with the switch off...
-
I have a 97 dodge 2500 pick up cummins diesel all the lights on the dash come on and the truck comes out of overdrive I changed the pcm and the ignition switch can anyone help me with what else could...
|