Search:

Just want to follow up my previous reply. I think the timing is off. Sparks will not produce combustion if the air is not compressed. Remove the spark plug and peek through the tiny hole to check...

Alison,

By judging you following response:

... it didn't start-still no spark---

I think the spark plug is sparking all the time. However you always thought that there is no spark and...

Some comments on the suggestion:

1. No or incorrect air gap between flywheel and lamination.

You probably have room to move the gap from 0 --> gap of a coin. It will all work, little weaker on...

Kis,


What is the electronic module? Possibly that the electronic module is referred to the ignition coil or ignition module. Anyway, regardless where the kill wire goes to, we can completely...

Light spark should be fine. It should still do the job. Remove the air filter, spray some starter fluid to the carb and try to start the engine. Let me know if there are backfires or smokings.

KIS,

On my question (3), I am not asking to measure the kill wire, it will be link to the ignitor switch and others junk. However, I am asking to measure the kill terminal on the IGNITION COIL...

Allison,

You have used the term ignition coil and ignition module, I hope you are referred to the same item, which locates next to the flywheel. If you have taken the kill wire to the ignition...

Alison,

That is good since you have the exact parts. Insteads of flip, I should have said turn it upside down, the mounting should still fit but the contact position may be off a little.
...

Alison,

You can ignore all the wires on the ignition switch right now if your starter is cracking.

Sound like you don't have sparks, so ignore all the fuel system right now.

You have the...