Search:
Type: Posts; User: jeff beckwith
Search:
Search took 0.00 seconds.
-
Hi mike the generator comes off if you remove the four bolt in the front they are short with nots on the back side then pull the housing off then there is a bolt in the center of the rotor the bolt...
-
Hi mike when I pulled the generator apart I found out the cam was steel ,but it was still flat the hardest part of replacing the cam is getting the stator off if you have problems them take it to a...
-
Michael I pulled the generator apart the cam was flat replaced and runs fine, the problem was the same as you have. My generator is model 204412 code 146 check to see if valve move the same distance
-
I was hoping that some could answer my question if the cam lobes on the intake and exhaust are the same hight, if so then I have a cam with a flat lobe on the exhaust. Michael you can check to see...
-
I seam to be having the same problem I noticed that the exhaust valve was moving about half the distance I talked to a mechanic that informed me that briggs is using plastic camshafts I haven't...
|