Search:

No and it's not like you just have the gas company suddenly show up during the small time frame that it happens... so now what?

Gas pressure checked an OK. Now what?

"And OK. Now what?

Natural, why? And how could gas pressure be corrected if low?

And how does one go about doing that?

And, if you suspect that may be the issue why would it only make the noise when it's 5 degrees or lower outside?

If you turn it up loud enough you can hear it. I only started the video when the "squealing" noise starts. It is NOT the motor. It appears to be coming from the gas valve area and only happens when...

Do you have an email address I can send the video to? I've attached a pic of the furnace

Does it have to be on You Tube?

They go out like turning off a switch

9-10 pounds and about 160 degrees

AO Smith, Gas, sounds like squealing coming from gas valve area

Why does my furnace boiler make a squealing type noise when it's getting close to cycling off during extra cold weather outside only?

Can you tell me if one can mix "synthetic" and "regular" R134a? Or, is it just that the stuff labeled "synthetic" (which is more expensive) is a marketing ploy?

A/C drain?

The engine has never overheated and the white smoke has more of an oily smell than a coolant smell.

I have 2 issues to ask about please. 1) I keep getting a PO 0420 code, off and on, about every 6 months. I have replaced all of the O2 sensors and the cat. Converter but this still occurs. Any...

Can some mechanic out there tell me the labor time to replace a tranny pan seal and filter on a 99 Nissan Altima? Also, is there any free laboe time guides on the internet for future similar...

Do you know of anything I can use it to "attract" it out, and what is the best way to capture it?

Unfortunately there is too much stuff stored in the basement that could be damaged by using a hose...

I found a small black snake in my basement today, a little larger than a nightcrawler. How can I make this thing come out in to the open and get rid of it?

Tx Grease Monkey, I already checked the ECT, what is the "MAF" sensor?

Can anyone offer advice as to why my mpg has suddenly decreased from an average 18 mpg down to 13mpg? I have checked and had completed all of the obvious things like a tune up, air filter, O2...

No ice build up last winter. This was an exceptional storm for us. If I send you photos of the situation would that help?

So, dynocompe, should I have someone remove the ice and snow now then to avoid issues when the melt occurs? I still don't understand why the other guy said to leave the ice alone.

That won't do me any good. I have a 2 story house. That rake won't cut it. There are roofers advertising to help get the ice and snow off. Why would I NOT want to bother the ice? I'm concerned about...

I was in the middle of the big snow storm in Pittsburgh. I have about 10-12 inches of snow on my roof with about 1-2" of ice under that. I also have gutters full of overflowing ice. Is it advisable...

My toilet does not seem to have as much vacuum power as it used to. Have to flush two to three times to get all of the material down sometime. Any advice?

I have a boiler type of furnace in my home (AO Smith, Model# HW120P720, photo attached). When it gets colder outside the boiler makes a "whining" noise when the gas/pilot comes on to heat up the...

That model number is right off the boiler itself. It is about 15-20 years old if that helps

http://pictures.sprintpcs.com/mmps/002_1433a93745669670_1/2.jpg?

It is natural gas. Model is a AOSmith Hydronic Boiler Model # HW12OP720.

I have a boiler type of furnace in my home. When it gets colder the boiler makes a "whining" noise when the gas/pilot comes on to heat up the tank. The noise stops as soon as the gas shuts off. Is...

Can someone please tell me a ballpark cost for a natural gas regulator on my AOS Smith boiler-type furnace that is approx. 20 years old?

Why would I have anal pain/discomfort as if I had to have a bowel movement but didn't after having missionary-style intercourse with my wife?

I am considering purchasing a small plot of land in PA. What fees and costs will I incur besides prop. Taxes to buy this land?

I removed the "crud" and it still goes about half way back down the spout on the underside from the front of the spout. Please advise.

Does a Honda Odyssey van have a timing belt/chain that needs changed periodically as do the Accords? If so, what is the timeframe?

It doesn't seem to be directly related to flushing in terms of when it smells worst. It was especially bad tonight after a heavy rain. Please advise.

Lately I have been smelling the scent of sewer gas coming from the attic area of the house. Any suggestions as to where this is coming from and how to correct it?

Why are parts of my tomatoe plants turning yellow and dying? There is still some healthy shoots with fruit on them. Lack of lime perhaps?

Gentlemen,

It's leaking from the tip of the spout. So does it ned replaced or just "scrub" out the calcification?

Can someone tell me why my bathtub faucet has water come out and run down the underside and then on to the tub surround as opposed to just straight down in to the tub and how to solve this issue?

I am working obn replacing an outdoor lamp fixture. The wires are older and unmarked. How do I tell which one is hot and which one is neutral?

Why is it that vidoe clips that I recorded on my digital camera play fine on the camera itself but play choppy on my PC?

The loud noise by the hot water tank only accurs when the washer is on but the occasional sputtering can occur at any faucet when the hot water is turned on. Regarding the release valve, I was told...

I'm having a problem where the how water is sputtering out of faucets and making a loud "jerking" noise from the hot water tank area when the washer tries to pull in hot water. I tried releasing the...

The one I have is different then that. I unscrewed that piece around the bottom of the spout and removed the nut under the spout on the underside of the sink mount and it still won't release.

I need to replace a kitchen faucet spout. It is a Peerless two-handle. I have the new spout. What other parts will I need and exactly how does this thing come apart to just replace the spout?

So I presume that the ones that were enclosed in the packaging are of poor quality and that is why they are not snug even though they state that they are for a 1 and 1/4" pipe? I guess I need to try...

Is a compression nut and gasket the same as a slip joint assembly?

Speedball, thanks for your kind response. The tailpiece and "raiser" (6" connector pipe) is brass and they came with "slip joint" parts. The problem is that when using these parts the tailpiece is...