Ask Experts Questions for FREE Help !
    awgo's Avatar
    awgo Posts: 1, Reputation: 1
    New Member

    Mar 24, 2004, 10:46 AM
    AWS D 1-1
    Could some one please send a copy of the page that states duties of welding inspector. And requirements of a written weld procedure. And qualification of a written weld procedure, thanks.
    viking's Avatar
    viking Posts: 131, Reputation: 7
    Junior Member

    May 28, 2004, 10:27 PM
    Re: AWS D 1-1
    This is a link to a document from the California DOT which should be helpful:

    Good luck.
    jamd's Avatar
    jamd Posts: 2, Reputation: 1
    New Member

    Dec 10, 2007, 03:41 AM
    To answer your question about weld requirements- you should have a referenced specification in your quote or contract.

    When reviewing the requirements of this specification you will be able to develop the requirements for auditors to this specification

    For example- if the penetration requirement is 10% material thickness, (as this is a destructive test in most cases) then you would want to check 30 pieces and get an idea on your capability. If the capability is good- then the checks could be once per shift- depending on your application. If the capability is bad- you would want to implment a BME check and take a look at your equipment to see what can be improved.

    Hope this helps.

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

View more questions Search