Add your answer here.
Check out some similar questions!
What type of fitting is recommended for gas. Flare or compression? [ 12 Answers ]
What type of fitting is recommended for gas. Flare or compression? Is this specified in any building codes?
Hot Water Baseboard Heat, Cold Rooms [ 9 Answers ]
I have hot water base board heat. About a week ago, I noticed I couldn't get the house to go above 62 degrees. When I touch the baseboards the two rooms at the beginning of the loop are hot, but as I go farther through the house the units are colder and colder leaving the two bedrooms freezing...
Type of wiring for hot tub outside [ 0 Answers ]
We are getting ready to run the electrical for our hot tub outdoors, do we need 6 awg or 8 awg wire? We are running copper wire not aluminum, the tub manufacture says 6 awg and they require a 50 amp breaker. The hot tub has 3 pumps and of course a heater.
Which material type for rain gutters is recommended, aluminum vs. Steel? [ 5 Answers ]
I live in a cold climate with snow in the winter and wind of course, it is Wyoming. The wind on average can be 20 mph during winter / spring and can gust up to 35mph with a severe storm. I have spoken with a contractor that handles steel and another contractor that handles aluminum gutters. The...
Sandy build up on hot tub wall [ 4 Answers ]
Hi, I have a sandy feeling build up on my hot tub walls and all surfaces covered by water. How can I get rid of it? Will it harm my pipes or any other part of the hot tub? Thank you
View more questions Search