Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Hole in bottom of inground liner pool
 [ 2 Answers ]
 I have an inground Clayton and Lambert pool, 37' X 19' by 8' deep on one end, 3' at the other end, steel walls and sand/cement bottom. I have a hole in the deep end bottom which tore a hole in the liner and lost about a 18 inches of water before I started pumping out the water to empty it. I... 
Find and repair hole in above ground pool liner
 [ 2 Answers ]
 I have a leak in the liner of above ground pool. How do I find and patch it? The pool was covered all summer and I wanted to fix air pillow and see there is only few inches water left. I started to fill and saw the soil around one area was getting very wet and summe that is where the leak is. How... 
Water behind a pool liner of an above ground pool
 [ 1 Answers ]
 Hello, the liner in part of my pool is below the water level and thus water is now behind the liner. I cannot pick up the liner because it is so heavy with the weight of the water. 1. Is this hurting my pool 2. How much to replace a new liner and have it installed for a 16ft round pool ... 
Inground Pool Liner- Large Hole Repair
 [ 3 Answers ]
 When opening our 9 year old inground pool this year, we found a large horizontal tear in one corner of the deep end. The tear is about 3-4 feet wide. Can we repair this tear rather than investing in the purchase and installation of a new liner? I am envisioning something like a 4-by-4 foot sheet... 
Install New Pool Liner-Above Ground Pool
 [ 1 Answers ]
 
We are going to install a new liner in an above ground pool this weekend. I have read conflicting information as to when the skimmer and jet holes should be cut. Do you fill the pool with water within a foot of the skimmer, attach the trim kit and then cut out the liner? I don't know what to do,... View more questions Search 
  |