Ask Experts Questions for FREE Help !
Ask
    mikecd's Avatar
    mikecd Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 7, 2009, 02:23 PM
    Sand bottom pool floor
    Should the floor of my sand bottom pool be smooth?
    TimN8er's Avatar
    TimN8er Posts: 5, Reputation: 1
    New Member
    		  
    #2

    Jul 1, 2009, 06:20 PM

    During install the floor should be level and packed smooth. There should be a cove on the side walls for the liner to transition from the floor to the wall. Now over time you will have see lines develop from earth worms etc. Even foot prints from people who jump in and plant there feet. This normal over the years. Some times you can smooth them out some what by your hands. Hope this helps.

    Cheers.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sand Filter is blowing out sand into my pool [ 3 Answers ]

Lately when I backwash my above ground pool, the filter blows out sand into the water. What causes this? When backwashing the filter, I turn off the pump, turn the dial to backwash and turn the pump on low. Is the pump supposed to be on during the backwash and rinse cycle?

Sunken sand bottom [ 1 Answers ]

We had a 24' round pool installed less than a month ago. The ground was damp when it was installed, but was tamped down well and we were assured that the only problem we would have is footprints from the installer putting in the liner. A layer of a sand mixture was put down over the dirt. We...

View more questions Search